Part Description: 2005 Chevrolet Blazer Lamp, High Mount Stop
More Info
Vehicle Fitment
2005 Chevrolet Blazer | Base, LS, LT, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
FAQ for Third Brake Light Repair
Q: What is the recommended torque for the high-mount stop lamp screws?
A:
The recommended torque is 2.5 Nm (22 lb in).
By Bob
GM Specialist
01/11/2022
Q: How to install the Brake Light Bulb?
A:
You need to install the bulbs into the sockets, install the bulb sockets to the tail lamp assembly, install the tail lamp assembly, and install the screws that retain the tail lamp assembly, then close the endgate or liftgate.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the screws retaining the tail lamp assembly to the vehicle?
A:
The recommended torque is 1.9 Nm (17 lb in).
By Bob
GM Specialist
01/11/2022
Q: How to remove the high-mounted stop lamp (utility-ending window)?
A:
You need to remove the screws that retain the high-mount stop lamp to the endgate window, remove the high-mount stop lamp, remove the electrical connector, pull the electrical connector through the hole in the body, and disconnect.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to remove the Tail Lamp?
A:
You need to open the endgate or liftgate, remove the screws that retain the tail lamp assembly to the vehicle, remove the bulb sockets from the tail lamp assembly, then remove the bulbs from the sockets.