< Back ×
My Vehicle Change Vehicle
2005 Chevrolet Blazer
< Back to View All
Fuel Systems
- Department
- Brands
- Prices
OEM (Genuine) 2005 Chevrolet Blazer Sensor, Fuel Tank Pressure
PartNumber: 16238399
Product Specifications- Notes: S-Series
- Item Dimensions: 3.2 x 2.1 x 2.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22678829, 09377680, 12219388, 16196060, 9377680, 12206740, 16217059, 16257276
- Part Description: 2005 Chevrolet Blazer Sensor, Fuel Tank Pressure
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
$48.11 MSRP:$98.40You Save: $50.29 (52%)
Delphi® Fuel Injection Pressure Regulator for 2005 Chevrolet Blazer
PartNumber: FP10075Product Specifications- Adjustable: No
- Inlet Port Diameter: 0.98''
- Inlet Quantity: 1
- Inlet Type: Cartridge
- Outlet Quantity: 1
- Outlet Type: Returnless
- UPC: 689604113318
- Part Description: 2005 Chevrolet Blazer Fuel Injection Pressure Regulator
Vehicle Fitment- 2005 Chevrolet Blazer | All Trims | All Engines
$57.51
Walker Products® Fuel Injection Pressure Regulator for 2005 Chevrolet Blazer
PartNumber: 255-1097Product Specifications- UPC: 724620054228
- Part Description: 2005 Chevrolet Blazer Fuel Injection Pressure Regulator
Vehicle Fitment- 2005 Chevrolet Blazer | All Trims | 6 Cyl 4.3L
$34.01
OEM (Genuine) 2005 Chevrolet Blazer Regulator Seal Kit
PartNumber: 19210686
Product Specifications- Notes: 4.3l Sfi
- Other Names: Fuel Pressure Regulator, Regulator Seal Kit
- Item Dimensions: 2.9 x 2.1 x 1.4 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88894356, 89060422, 89017453, 17113203
- Part Description: 2005 Chevrolet Blazer Regulator Seal Kit
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
$81.91 MSRP:$154.56You Save: $72.65 (48%)
Original Engine Management® Fuel Injection Pressure Regulator for 2005 Chevrolet Blazer
PartNumber: FPR7Product Specifications- Adjustable: Yes
- Contents: Includes Caution Sheet
- Functions: Regulator
- Inlet Quantity: 1
- New or Reman: New
- Nipple Orientation: Angled
- Number of Outlets: 1
- Reference Port Included: No
- UPC: 841266083082
- Part Description: 2005 Chevrolet Blazer Fuel Injection Pressure Regulator
Vehicle Fitment- 2005 Chevrolet Blazer | All Trims | 6 Cyl 4.3L
FAQ for Fuel Pressure Regulator Repair
Q: What kind of special tools will be required for Fuel Pressure Relief?
A:
J34730-1A Fuel Pressure Gage.
By Bob
GM Specialist
29/10/2022Q: How to install the Fuel Pressure Regulator?
A:
You need to lubricate the new O-rings seals with clean engine oil, assemble the new backup ring, regulator seal O-rings, and regulator filter to the fuel pressure regulator, next install the fuel pressure regulator with the vacuum tube pointing down, then install the fuel pressure regulator retainer clip, and finally install the upper manifold.
By Bob
GM Specialist
29/10/2022Q: How to relieve the Fuel Pressure?
A:
You need to turn the ignition OFF, disconnect the negative battery cable, loosen the fuel filler cap to relieve the fuel tank vapor pressure, connect the J 34730-1A or the equivalent to the fuel pressure connection, wrap a shop towel around the fitting while connecting the gage, install the bleed hose of the gage into an approved container, then bleed the system pressure, and finally drain any fuel remaining in the gage into an approved container.
By Bob
GM Specialist
29/10/2022Q: Can you reuse the O-rings seals?
A:
No, you should install the new O-rings seals.
By Bob
GM Specialist
29/10/2022