Part Description: 2005 Chevrolet Blazer Rod Kit, Steering Linkage Outer Tie
More Info
Vehicle Fitment
2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
FAQ for Center Link Repair
Q: What is the recommended torque for the steering shock absorber ball stud nut?
A:
The recommended torque is 63 Nm (46 ft. lbs.).
By Bob
GM Specialist
01/11/2022
Q: What kind of special tools will be required when serving the Relay Rod (4WD)?
A:
J6627-A Tie Rod Puller, J 24319-B Steering Linkage and Tie Rod Puller.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the idler arm ball stud nut?
A:
The recommended torque is 82 Nm (60 ft. lbs.).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What kind of special tools will be required in the replacement of the Pitman Arm (4WD)?
A:
J29107-A Pitman Arm Puller, J 6632-01 Pitman Arm Puller.
Q: What should be noticed before installing the Tie Rod (4WD)?
A:
If the Tie Rod Ends were removed, lubricate the tie rod ends with chassis lubricant. And ensure that the number of threads on both the inner and the outer tie rod ends is equal within three threads.
Q: What is the recommended torque for the idler arm mounting bolt and nuts?