< Back ×
My Vehicle Change Vehicle
2005 Chevrolet Blazer
< Back to View All
Transmissions Components & Shifters
- Department
- Brands
- Prices
OEM (Genuine) 2005 Chevrolet Blazer Extension Housing Seal
PartNumber: 24232325
Product Specifications- Notes: S-Series
- Other Names: Extension Housing Seal
- Item Dimensions: 3.7 x 3.8 x 1.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24201470
- Part Description: 2005 Chevrolet Blazer Extension Housing Seal
Vehicle Fitment- 2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
$13.93 MSRP:$23.03You Save: $9.10 (40%)
National® Automatic Transmission Extension Housing Seal for 2005 Chevrolet Blazer
PartNumber: 4333NProduct Specifications- Notes: Boot Type; w/1.500in Width; w/New Process 233C Transfer Case; 2Spd; w/Part Time 4WD
- Type: 79
- Part Description: 2005 Chevrolet Blazer Automatic Transmission Extension Housing Seal
Vehicle Fitment- 2005 Chevrolet Blazer | All Trims | All Engines
$15.77
National® Automatic Transmission Extension Housing Seal for 2005 Chevrolet Blazer
PartNumber: 710928Product Specifications- Notes: Dual Lip; w/New Process 233C Transfer Case; 2Spd; w/Part Time 4WD
- Housing Bore (Inch): 2.680 in
- Housing Bore (mm): 68.070 mm
- Inside Diameter (Inch): 1.938 in
- Inside Diameter (mm): 49.230 mm
- Material: Polyacrylate
- Outside Diameter (Inch): 2.685 in
- Outside Diameter (mm): 68.200 mm
- Sealing Material: Polyacrylate
- Series: 710900
- Shaft (Inch): 1.938 in
- Shaft (mm): 49.230 mm
- Thickness (Inch): 0.500 in
- Thickness (mm): 12.700 mm
- Type: 32
- Width (Inch): 0.500 in
- Width (mm): 12.700 mm
- Part Description: 2005 Chevrolet Blazer Automatic Transmission Extension Housing Seal
Vehicle Fitment- 2005 Chevrolet Blazer | All Trims | All Engines
$7.26
FAQ for Automatic Transmission Extension Housing Seal Repair
Q: What kind of special tools will be required when serving the Transmission Housing Oil Seal- Front?
A:
J38801 Input Seal Installer.
By Bob
GM Specialist
28/10/2022Q: How to remove the Transmission Housing Oil Seal-Rear (4WD)?
A:
You need to remove the transfer case and the seal from the extension housing.
By Bob
GM Specialist
28/10/2022Q: What kind of special tools will be required when serving the Transmission Extension Housing Rear Oil Seal?
A:
J21426 Extension Housing Seal Installer, J 36850 Transjel Lubricant.
By Bob
GM Specialist
28/10/2022Q: How to install the Transmission Housing Oil Seal-Rear (2WD)?
A:
You need to install the new rear oil seal and the rear propeller shaft, then check the transmission oil level.
By Bob
GM Specialist
28/10/2022Q: How to remove the Transmission Extension Housing Rear Oil Seal?
A:
You need to remove the propeller shaft and the case extension housing rear oil seal, then inspect the case extension housing for damage and replace the extension housing if necessary.
By Bob
GM Specialist
28/10/2022Q: What kind of special tools will be required when serving the Transmission Housing Oil Seal-Rear (2WD)?
A:
J23129 Universal Seal Remover, J 6125-1B Slide hammer, and J 36503 Seal Installer.
By Bob
GM Specialist
28/10/2022Q: What kind of special tools will be required when serving the Transmission Housing Oil Seal-Rear (4WD)?
A:
J36825 Universal Seal Remover, J 23907 Slide Hammer, J 36502-2A Shaft Seal Protector/Installer, and J 36502 Extension Housing Seal Installer.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the bearing retainer bolts?
A:
The recommended torque is 14 Nm (10 ft. lbs.).
By Bob
GM Specialist
28/10/2022See more FAQs (3)