Notes: Temperature 195 Degrees; Part Replacement Replaced by 13349; Excludes Housing; For Metal Housing Only; OE Temperature
Flange Diameter (Without Seal) (in): 1.885
Freight Class: 70
Height from Flange to Bottom (in): 0.82
Height from Flange to Top of Bridge (in): 0.78
Temperature (F): 195 Degrees
UPC: 333420314946
Part Description: 2005 Chevrolet Aveo Premium Engine Coolant Thermostat
More Info
Vehicle Fitment
2005 Chevrolet Aveo | All Trims | 4 Cyl 1.6L
FAQ for Thermostat Repair
Q: What is the first step for replacing the thermostat (1.4L/1.6L DOHC)?
A:
The first step is to drain the coolant.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque when installing the thermostat with the bolts and the thermostat housing?
A:
You can tighten the mounting bolts to 20 Nm (15 ft. lbs.).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the recommended torque when installing the upper right radiator retaining bolt?
A:
You can tighten the upper right Radiator retaining bolt to 7 Nm (62-inch lbs.).
Q: How do you install the surge tank?
A:
You can install the surge tank, secure the surge tank with the attaching nuts, connect the overflow hose to the surge tank, secure the overflow hose to the surge tank, and fill the surge tank with the coolant to the center ridge, or the MAX mark.
Q: What is the removal procedure for the engine coolant temperature (ECT) sensor?
A:
The procedure is to relieve the coolant system pressure, disconnect the negative battery cable, drain the coolant below the engine coolant temperature (ECT) sensor level, disconnect the ECT sensor connector and remove the ECT sensor.