FAQ for Shock Absorber Repair
Q: What should you make sure of when fastening the strut assembly to the KM-329-A?
A:
You should make sure the hooks are seated on the strut spring properly.
By BobGM Specialist
01/11/2022 Q: What tool can be used to remove the piston rod nut?
A:
You can use the J 42468-A.
By BobGM Specialist
01/11/2022 Q: How do you install the shock absorber?
A:
You can insert the lower shock absorber-to-axle bolt through the shock absorber lower attachment bracket and into the axle, lower the vehicle enough to guide the upper shock stud on the body opening, and loosely install the attaching bolts.
By BobGM Specialist
01/11/2022 Q: What tool can be used to separate the steering knuckle assembly from the ball joint?
A:
You can use the KM-507-C.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque when installing the ball joint-to-knuckle/strut nut?
A:
You can tighten the knuckle to strut bolts to 100 Nm (74 ft. lbs.).
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the shock absorber?
A:
The procedure is to remove the shock absorber-to-body bolts-upper, raise the vehicle and support the rear axle assembly, remove the lower shock absorber-to-axle bolt and remove the shock absorber.
By BobGM Specialist
01/11/2022 See more FAQs (1)