Part Description: 2005 Chevrolet Aveo Pipe, P/S Fluid Reservoir Inlet
More Info
Vehicle Fitment
2005 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
FAQ for Power Steering Hose Repair
Q: What is the first step for replacing the power steering pump hoses and pipes?
A:
The first step is to siphon the power steering fluid from the fluid reservoir.
By Bob
GM Specialist
02/11/2022
Q: What is the removal procedure for the power steering return hose?
A:
The procedure is to siphon the power steering fluid from the fluid reservoir, disconnect the return line pipe from the outlet connection at the steering gear, disconnect the fluid reservoir hose from the fluid reservoir and remove the fluid reservoir hose.
By Bob
GM Specialist
02/11/2022
Q: What is the recommended torque when connecting the pressure line inlet pipe to the steering gear?
A:
You can tighten the steering gear inlet pipe fitting to 28 Nm (21 ft. lbs.).
By Bob
GM Specialist
02/11/2022
Q: What is the recommended torque when connecting the fluid reservoir pipe to the outlet connection at the steering gear?
A:
You can tighten the steering gear outlet pipe fittings to 28 Nm (21 ft. lbs.).
By Bob
GM Specialist
02/11/2022
FAQ for Other Repair Info
Q: What is the first step for installing the park brake cable?
A:
The first step is to install the new Parking Brake Cable through the brake backing plate.
Q: What is the recommended torque when installing the wheel cylinder to the backing plate with the wheel cylinder bolt?
A:
You can tighten the Wheel Cylinder-to-backing plate bolt to 8 Nm (71-inch lbs.).
Q: How do you replace the rear brake hose?
A:
You can raise the vehicle, disconnect the brake lines from the Brake Hoses, remove both brake hose E-ring retainers and remove the brake hoses from the brackets.