FAQ for Battery Cables Repair
Q: What should you use to front-probe terminals?
A:
You should always use the J 35616-B Connector Test Adapter Kit or the J 42675 Flat Wire Probe Adapter Kit for front-probe terminals.
By BobGM Specialist
01/11/2022 Q: What should you do when connecting or disconnecting battery cables, battery chargers, or jumper cables?
A:
You should always turn the ignition OFF.
By BobGM Specialist
01/11/2022 Q: What should you do when encountering a CAUTION?
A:
You should take necessary action or not take a prohibited action.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque when installing the clamping bolt to the negative cable?
A:
You can tighten the battery negative cable to 4.5 N.m (40 lb in).
By BobGM Specialist
01/11/2022 Q: What should you do before servicing any electrical component?
A:
You should turn the ignition key in the OFF or LOCK position and all electrical loads must be OFF unless instructed otherwise in these procedures.
By BobGM Specialist
01/11/2022 Q: What kinds of fasteners are identified in the service procedure?
A:
Fasteners requiring replacement or fasteners requiring the use of thread-locking compound or sealant are identified in the service procedure.
By BobGM Specialist
01/11/2022 Q: What should you do before servicing any electronic component?
A:
You should touch a metal ground point to remove your body's static charge before servicing any electronic component.
By BobGM Specialist
01/11/2022 See more FAQs (2)