Notes: Factory filled synthetic oil - WIX XP or WIX Premium;Master Pack Version;Manufacturer OE Recommended Oil Change Intervals
Anti-Drain Back Valve: Yes
BetaRatio: 2/20=6/20
Burst Pressure: 290
Bypass Relief Valve Setting: None
Case Quantity: 12
Class: A
Duty Type: LD
Flow Rate: 9-11 GPM
Height: 4.526
Inner Diameter Top: Closed
Media Material: Enhanced Cellulose
Micron: 21.00
Outer Diameter Top: 2.921
Style: Spin-On Lube Filter
Thread Size: 13/16-16
UPC: 765809505223
Part Description: 2005 Cadillac SRX Spin-On Lube Engine Oil Filter
More Info
Vehicle Fitment
2005 Cadillac SRX | All Trims | 8 Cyl 4.6L
FAQ for Oil Filter Repair
Q: What should be done before servicing the Engine Oil and Oil Filter?
A:
You should turn the ignition OFF.
By Bob
GM Specialist
02/11/2022
Q: What should be noticed when servicing the Engine Oil and Oil Filter?
A:
Use a six-point socket to remove the oil filter cap.
By Bob
GM Specialist
02/11/2022
Q: What should you do before servicing the Oil Pump Pipe and Screen Assembly?
A:
You should remove the oil pan.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the oil suction pipe bolts?
A:
The recommended torque is 10 N.m (89-inch lbs.).
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the oil pan drain plug?
A:
The recommended torque is 20 N.m (15 ft. lbs.).
By Bob
GM Specialist
29/10/2022
Q: What should be done before servicing the Engine Oil and Oil Filter?
A:
You should turn the ignition OFF.
By Bob
GM Specialist
29/10/2022
See more FAQs (1)
FAQ for Other Repair Info
Q: How do you remove the Oil Filter Adapter?
A:
You can remove the oil filter, remove the A/C compressor and power steering drive belt, remove the A/C compressor bolts and reposition the A/C compressor to gain access to the Oil Filter Adapter fasteners, and remove the oil filter adapter.
Q: What should be noticed when servicing the Oil Level Indicator and Tube?
A:
Ensure that the secondary (small square) heat shield is properly installed to the oil level indicator tube as noted during removal.
Q: What should you do after installing the engine mount lower nuts?
A:
You should connect the intermediate steering shaft.