2005 Buick Rainier Belt Tensioner

You should install the Idler Pulley, secure the pulley with the bolt and install the drive belt.

You should remove the camshaft cover and the engine front cover, release the tension on the Timing Chain by moving the tensioner shoe in, place the tee into the tensioner to hold the shoe in place, and remove the top chain guide bolts, the top chain guide, the exhaust camshaft position actuator bolt, the exhaust camshaft position actuator, the intake camshaft sprocket bolt, the intake camshaft sprocket, the timing chain, the crankshaft sprocket, the cylinder head access hole plugs, the timing chain tensioner shoe bolt, the timing chain tensioner shoe, the timing chain tensioner guide bolts, the timing chain tensioner guide, the timing chain tensioner bolts, and the timing chain tensioner.

You should remove the Camshaft cover and the intake and the exhaust camshaft sprocket bolts, install the J 44222 onto the cylinder head and adjust the horizontal bolts into the camshaft sprockets to maintain chain tension and keep from disturbing the timing chain components, carefully move the sprockets with the timing chain, off of the camshafts, remove the camshaft cap bolts and the camshaft caps and store, place the camshaft caps in a rack to ensure the caps are installed in the same location from which they were removed and remove the camshafts.