< Back ×
My Vehicle Change Vehicle
2005 Buick Park Avenue
< Back to View All
Wheel Hubs, Bearings & Seals
- Department
- Brands
- Prices
OEM (Genuine) 2005 Buick Park Avenue Front Hub
PartNumber: 19259596
Product Specifications- Item Dimensions: 8.5 x 7.1 x 7.0 inches
- Item Weight: 11.70 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19433930
- Part Description: 2005 Buick Park Avenue Front Hub
Vehicle Fitment- 2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
$219.54 MSRP:$414.26You Save: $194.72 (48%)
FAG® Front Wheel Bearing and Hub Assembly for 2005 Buick Park Avenue
PartNumber: 102026Product Specifications- Notes: FAG Global# 102026; ABS Cable Included
- Hub Flange Mount Hole Quantity: 3
- Number of Bolt Holes: 3
- Number of Hub Bolts: 5
- UPC: 670774103063
- Part Description: 2005 Buick Park Avenue Front Wheel Bearing and Hub Assembly
Vehicle Fitment- 2005 Buick Park Avenue | All Trims | All Engines
$109.31
OEM (Genuine) 2005 Buick Park Avenue Hub & Bearing
PartNumber: 7470555
Product Specifications- Notes: Park Avenue
- Location: Driver Side; Passenger Side
- Item Dimensions: 7.2 x 7.1 x 8.6 inches
- Item Weight: 8.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick Park Avenue Hub & Bearing
Vehicle Fitment- 2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
FAQ for Wheel Bearing Repair
Q: How to remove the Wheel Bearing/Hub-Front?
A:
First, you need to raise and support the vehicle, remove the tire and wheel, and clean the drive axle threads of all dirt. Then, please remove the drive axle nut and the brake rotor, disconnect the Antilock Brake System (ABS) front wheel speed sensor connector, remove the wheel bearing/hub from the steering knuckle, and remove the dust shield. Finally, you should separate the hub and bearing from the drive axle, and clean the rust and foreign material from the knuckle mounting face, the bore, and the chamber.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the wheel bearing/hub bolts?
A:
The recommended torque is 70 N.m (52 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to install the Wheel Bearing/Hub-Rear?
A:
First, you need to install the brake shield and the wheel bearing/hub to the control arm. Then, please install the wheel bearing/hub retaining bolts, and connect the wheel/hub electrical connector. Finally, you should install the brake rotor, and the tire and wheel.
By Bob
GM Specialist
01/11/2022Q: What kind of special tool is needed when replacing the Wheel Bearing/Hub-Front?
A:
You need to use the J 28733-B Front Hub Spindle Remover.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the wheel bearing/hub retaining bolts?
A:
The recommended torque is 95 N.m (70 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to remove the Wheel Bearing/Hub-Rear?
A:
First, you need to remove the tire and wheel and the brake rotor and disconnect the wheel bearing/hub electrical connector. Then, please remove the wheel bearing/hub lower, and remove the brake shield from the lower control arm. Finally, you should clean the control arm face and the bore.
By Bob
GM Specialist
01/11/2022See more FAQs (1)