< Back ×
My Vehicle Change Vehicle
2005 Buick Park Avenue
< Back to View All
Control Arms & Suspension Rods
- Department
- Prices
OEM (Genuine) 2005 Buick Park Avenue Steering Knuckle
PartNumber: 19303855
Product Specifications- Notes: Park Avenue; Left
- Location: Driver Side
- Other Names: Knuckle
- Item Dimensions: 15.3 x 13.7 x 7.5 inches
- Item Weight: 10.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 88955414, 15207874, 18060676, 25996821, 18060642
- Part Description: 2005 Buick Park Avenue Steering Knuckle
Vehicle Fitment- 2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
OEM (Genuine) 2005 Buick Park Avenue Knuckle Steering
PartNumber: 19303856
Product Specifications- Notes: Park Avenue; Right
- Location: Passenger Side
- Other Names: Knuckle
- Item Dimensions: 11.9 x 10.4 x 5.6 inches
- Item Weight: 4.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25996835, 88955415, 15207920, 18060643, 18060677
- Part Description: 2005 Buick Park Avenue Knuckle Steering
Vehicle Fitment- 2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
FAQ for Steering Knuckle Repair
Q: What special tools are needed when replacing the Steering Knuckle?
A:
You need to use the J 43828 Ball Joint Separator, the J 24319-B Steering Linkage and Tie Rod Puller, and the J 28733-B Front/Rear Spindle Remover.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the drive axle nut?
A:
The recommended torque is 160 N.m (118 lb-ft).
By Bob
GM Specialist
02/11/2022Q: How to remove the Steering Knuckle?
A:
First, you need to remove the tire and wheel, insert the drift of screwdriver into the caliper and rotor, remove the drive axle nut and the brake rotor, disconnect the wheel speed sensor electrical connector, and remove the wheel bearing and hub retaining bolts. Then, please remove the hub and drive axle, separate the tie rod from the steering knuckle, remove the dust shield, and remove the front strut to the steering knuckle retaining bolts. Finally, you should separate the ball joint from the steering knuckle, and remove the steering knuckle.
By Bob
GM Specialist
02/11/2022