< Back ×
My Vehicle Change Vehicle
2005 Buick Park Avenue
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2005 Buick Park Avenue Pad Asm, Driver Seat Cushion
PartNumber: 12456668
Product Specifications- Notes: Driver Seat
- Other Names: Seat Cushion Pad
- Item Dimensions: 28.4 x 22.8 x 9.0 inches
- Item Weight: 5.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick Park Avenue Pad Asm, Driver Seat Cushion
Vehicle Fitment- 2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
OEM (Genuine) 2005 Buick Park Avenue Pad Asm, Passenger Seat Cushion
PartNumber: 12456673
Product Specifications- Notes: Passenger Seat
- Other Names: Seat Cushion Pad
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick Park Avenue Pad Asm, Passenger Seat Cushion
Vehicle Fitment- 2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
FAQ for Seat Cushion Pad Repair
Q: How to remove the Seat Cushion Cover-Rear?
A:
First, you need to remove the rear seat cushion and the 6 push-in retainers. Then, please release the J-channel from the seat frame and pull the cover upward from the cushion. Finally, you should remove the cover and then the cushion.
By Bob
GM Specialist
02/11/2022Q: How to remove the Seat Back Cover and Pad-Rear?
A:
First, you need to remove the rear seat back and the rear armrest. Then, please remove the hog rings from the seat trim cover, and separate the seat trim cover from the seat cushion. Finally, you should remove the seat trim cover and seat back foam cushion.
By Bob
GM Specialist
02/11/2022Q: How to install the Seat Cushion Cover-Rear?
A:
First, you need to align the cover on the cushion and press the cover seams downward to engage the hook and the loop. Then, please work the cover over the sides of the cushion, and latch the J-channel to the seat cushion frame. Finally, you should install the 6 push-in retainers to the bottom side of the seat cushion frame, and install the seat cushion.
By Bob
GM Specialist
02/11/2022Q: How to install the Seat Back Cover and Pad-Rear?
A:
First, you need to install the seat back foam cushion and install the seat trim cover over the foam cushion. Then, please remove the wrinkles from the trim cover, and install new hog rings to secure the trim cover to the seat back. Finally, you should install the rear armrest and the rear seatback.
By Bob
GM Specialist
02/11/2022Q: How to remove the Seat Back Cover and Pad-Front?
A:
First, you need to remove the front seat assembly, the front seat side airbag, the head restraint, and the map pocket panel, and release the attachment hooks. Then, please disconnect the seat heater electrical connector, release and remove the rear seat belt height adjuster trim cover, and remove the height adjuster closeout ring from the seat back cover attachment hook. You also need to remove the height adjuster front trim cover, work the cover and pad up on the seat back frame, remove the lower seat belt retractor trim cover, and remove the retractor assembly. Finally, you should feed the lower seat belt retractor assembly through the height adjuster opening and remove the cover and pad, and remove the seatback cover.
By Bob
GM Specialist
01/11/2022Q: How to remove the Seat Cushion-Front?
A:
First, you need to remove the front seat assembly, the seat switch, and bezel assembly, and the armrest assembly. Then, please disconnect the heated seat wire harness, disconnect the auxiliary power outlet electrical connector, remove the 4 nuts on the bottom in each corner of the seat pan, and remove the seat pan and the seat cushion as 1 piece. You also need to remove the fastener retaining the auxiliary power outlet, the power outlet, and the J-channel from the front-to-rear flaps and the side-to-side flaps. Finally, you should remove the push-in retainer securing the seat cover to the seat pan, remove the fasteners retaining the seat cover to the seat switch bezel mounting opening, and remove the seat cushion cover and the seat cushion.
By Bob
GM Specialist
01/11/2022Q: How to install the Seat Back-Rear?
A:
First, you need to install the seatback and connect the guide wires to the hooks. Then, please install the lap belts and the lap belt bolts. Finally, you should install the 2 retainers in the trunk that secure to the armrest near the pass-through opening, and install the seat cushion.
By Bob
GM Specialist
01/11/2022Q: How to install the Seat Back Frame-Front?
A:
First, you need to install the seatback frame, apply Loctite(TM) 242 GM P/N 12345382 (Canada P/N 10953489) to the seatback frame bolts, and connect the electrical connectors. Then, please install the shoulder belt retractor assembly, the seatback cover and pad, and the seat side airbag. Finally, you should install the head restraint, the seat map pocket panel, and the front seat assembly.
By Bob
GM Specialist
01/11/2022Q: How to install the Seat Cushion-Rear?
A:
First, you need to lift the rear cushion into the body. Then, please align the frame wire offsets on the front of the seat cushion frame with the retainers on the floor pan. Finally, you should push the seat cushion rearward until the offsets engage in the retainers, and press down and pull the cushion forward to fully engage the retainers.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the lap belt bolts?
A:
The recommended torque is 41 N.m (30 lb-ft).
By Bob
GM Specialist
01/11/2022See more FAQs (10)