2005 Buick Park Avenue Rain Sensors

First, you need to disconnect the electrical connector from the Washer Pump and the washer solvent container level sensor, disconnect the washer hose from the washer pump, and drain the washer solvent into a suitable container. Then, please remove the brake master cylinder mounting nuts, position the brake master cylinder toward the passenger compartment, and remove the 2 nuts from the washer solvent container. The washer solvent container has a tab located in a slot in the vehicle body rail. Finally, you should remove the washer solvent container from the vehicle, remove the washer pump and the grommet from the washer solvent container, and remove the washer solvent level sensor from the washer solvent container.

First, you need to remove the Wiper Blade from the wiper arm. Then, please remove the bottom claws of the wiper blade from the notches in the wiper blade element. Finally, you should pull the wiper blade element out through the wiper blade claws.

First, you need to position the washer solvent level sensor grommet to the washer solvent container and install the washer solvent level sensor into the washer solvent container. Then, please connect the electrical connector to the level sensor and fill the washer solvent container with the washer solvent. Finally, you should secure the washer solvent container cap and verify the wiper washer system operation.