< Back ×
My Vehicle Change Vehicle
2005 Buick Park Avenue
< Back to View All
Power Steering Pumps
- Department
- Brands
- Prices
Cardone Reman® Remanufactured Power Steering Pump w/o Reservoir for 2005 Buick Park Avenue
PartNumber: 20-542Product Specifications- Notes: For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line filter available;Supplied w/o Reservoir
- Hose Port: O-Ring
- Housing Material: Cast Iron
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Reservoir: Without
- Thread Size: M16 x 1.5
- Part Description: 2005 Buick Park Avenue Remanufactured Power Steering Pump w/o Reservoir
Vehicle Fitment- 2005 Buick Park Avenue | All Trims | All Engines
$61.69
OEM (Genuine) 2005 Buick Park Avenue PUMP KIT, P/S
PartNumber: 19369067
Product Specifications- Notes: Park Avenue
- Other Names: Power Steering Pump
- Item Dimensions: 8.2 x 5.3 x 5.3 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26086070
- Part Description: 2005 Buick Park Avenue PUMP KIT, P/S
Vehicle Fitment- 2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
MAVAL® Remanufactured Power Steering Pump for 2005 Buick Park Avenue
PartNumber: 97186MProduct Specifications- Notes: (All Models); Pulley needs to be transferred w/proper pulley removal/install toll.
- UPC: 843613121409
- Part Description: 2005 Buick Park Avenue Remanufactured Power Steering Pump
Vehicle Fitment- 2005 Buick Park Avenue | All Trims | All Engines
FAQ for Power Steering Pump Repair
Q: How to remove the Power Steering Pulley?
A:
First, you need to remove the drive belt and the power steering pump. Then, please remove the power steering pulley from the power steering pump.
By Bob
GM Specialist
01/11/2022Q: How to remove the Power Steering Pump?
A:
First, you need to remove the drive belt, raise and support the vehicle, and install a drain pan under the vehicle. Then, please disconnect the power steering pressure hose and the power steering return hose from the power steering pump, and disconnect the wiring harness from the power steering pump. Finally, you should remove the antilock brake wiring harness bracket, remove the outer tie rod from the steering knuckle, remove the right outer tie rod from the steering knuckle, and remove the power steering pump.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the power steering pump retaining bolts?
A:
The recommended torque is 27 N.m (20 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What kind of special tool is needed when replacing the Power Steering Pump?
A:
You need to use the J 24319-B Steering Linkage and Tie Rod Puller.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the power steering pressure hose?
A:
The recommended torque is 27 N.m (20 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What special tools are needed when replacing the Power Steering Pulley?
A:
You need to use the J25034-C Pulley Remover and the J25033-C Pulley installer.
By Bob
GM Specialist
01/11/2022Q: How to install the Power Steering Pulley?
A:
First, you need to install the power steering pulley to the power steering pump. Then, please install the power steering pump to the engine and install the power steering pump drive belt. Finally, you should bleed the power steering system and inspect the power steering system for leaks.
By Bob
GM Specialist
01/11/2022Q: How to remove the Power Steering Pump Flow Control Valve-On Vehicle?
A:
First, you need to raise and support the vehicle and install a drain pan under the vehicle. Then, please remove the power steering pressure hose from the flow control valve. Finally, you should remove the power steering flow control valve assembly and the power steering flow control spring.
By Bob
GM Specialist
01/11/2022Q: How to install the Power Steering Pump Flow Control Valve-On Vehicle?
A:
First, you need to install the power steering flow control spring to the power steering pump. Then, please install the power steering flow control valve assembly to the power steering pump. Finally, you should install the power steering pressure hose to the power steering pump, lower the vehicle, and bleed the power steering system.
By Bob
GM Specialist
01/11/2022See more FAQs (4)