< Back ×
My Vehicle Change Vehicle
2005 Buick Park Avenue
< Back to View All
Fuel Systems
- Department
- Brands
- Prices
Delphi® Fuel Injection Pressure Regulator for 2005 Buick Park Avenue
PartNumber: FP10377Product Specifications- Adjustable: No
- Inlet Port Diameter: 24.0 mm
- Inlet Quantity: 1
- Inlet Type: Push In
- Material: Metal
- Mounting Type: Clamp
- Outlet Quantity: 1
- Outlet Type: Returnless
- UPC: 689604291429
- Part Description: 2005 Buick Park Avenue Fuel Injection Pressure Regulator
Vehicle Fitment- 2005 Buick Park Avenue | All Trims | 6 Cyl 3.8L
$68.18
Walker Products® Fuel Injection Pressure Regulator for 2005 Buick Park Avenue
PartNumber: 255-1068Product Specifications- Notes: Incl.O-Rings
- UPC: 724620071768
- Part Description: 2005 Buick Park Avenue Fuel Injection Pressure Regulator
Vehicle Fitment- 2005 Buick Park Avenue | All Trims | 6 Cyl 3.8L
$41.34
OEM (Genuine) 2005 Buick Park Avenue Fuel Pressure Regulator
PartNumber: 19245529
Product Specifications- Notes: Park Avenue; W/O Supercharger
- Other Names: Fuel Pressure Regulator
- Item Dimensions: 4.4 x 3.4 x 2.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12583236, 17113660, 89060418
- Part Description: 2005 Buick Park Avenue Fuel Pressure Regulator
Vehicle Fitment- 2005 Buick Park Avenue | Base | 6 Cyl 3.8 L GAS
$77.29 MSRP:$145.84You Save: $68.55 (48%)
Delphi® Fuel Injection Pressure Regulator for 2005 Buick Park Avenue
PartNumber: FP10238Product Specifications- Adjustable: No
- Inlet Port Diameter: 25.0 mm
- Inlet Quantity: 1
- Inlet Type: Push In
- Material: Metal
- Mounting Type: Clamp
- Outlet Quantity: 1
- Outlet Type: Returnless
- UPC: 689604114940
- Part Description: 2005 Buick Park Avenue Fuel Injection Pressure Regulator
Vehicle Fitment- 2005 Buick Park Avenue | Base | All Engines
$67.63OEM (Genuine) 2005 Buick Park Avenue Fuel Pressure Regulator
PartNumber: 24506988
Product Specifications- Notes: Park Avenue; W/Supercharger
- Other Names: Fuel Pressure Regulator
- Item Dimensions: 3.0 x 2.0 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24503229
- Part Description: 2005 Buick Park Avenue Fuel Pressure Regulator
Vehicle Fitment- 2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
Original Engine Management® Fuel Injection Pressure Regulator for 2005 Buick Park Avenue
PartNumber: FPR5Product Specifications- Adjustable: Yes
- Contents: Includes Mounting Bracket
- Functions: Regulator
- Hardware Included: Yes
- Inlet Quantity: 1
- Mounting Type: Flange
- New or Reman: New
- Nipple Orientation: Angled
- Notes: Includes O-Ring
- Number of Outlets: 1
- OE Part Number: 17113288
- Reference Port Included: No
- UPC: 841266083068
- Part Description: 2005 Buick Park Avenue Fuel Injection Pressure Regulator
Vehicle Fitment- 2005 Buick Park Avenue | All Trims | All Engines
FAQ for Fuel Pressure Regulator Repair
Q: How to remove the Fuel Rail Assembly?
A:
First, you need to relieve the fuel pressure from the fuel system, clean the fuel rail assembly and connections, disconnect the fuel feed, and return pipes from the fuel rail tubes. Then, please disconnect the vacuum line from the fuel pressure regulator, remove the ignition coil wires, depress the lock tab and disconnect the electrical connectors from the fuel injectors, and remove the fuel rail hold-down bolts. Finally, you should raise the injectors, and remove the fuel rail with equal force on both sides of the fuel rail.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the fuel rail hold-down bolts?
A:
The recommended torque is 110 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What kind of special tool is needed when replacing the Fuel Rail Assembly?
A:
You need to use the J 43013Fuel Injector Remover.
By Bob
GM Specialist
01/11/2022Q: How to install the Fuel Pressure Regulator?
A:
First, you need to install the new O-rings on the fuel pressure regulator and lubricate the O-rings lightly with clean engine oil. Then, please install the regulator backup O-ring, the regulator O-ring large, the regulator filter screen, the regulator O-ring small, install the fuel pressure regulator in the fuel pressure regulator housing, install the snap ring, and install the vacuum hose to the fuel pressure regulator. Finally, you should inspect for fuel leaks and install the fuel injector sight shield.
By Bob
GM Specialist
29/10/2022Q: How to remove the Fuel Pressure Regulator?
A:
First, you need to relieve the fuel pressure, clean any dirt from the fuel pressure regulator retaining ring, remove the vacuum hose from the pressure regulator, and remove the snap ring. Then, please use a shop towel to catch any spilled fuel, and lift and twist the fuel pressure regulator. Finally, you should remove the regulator O-ring small, the regulator filter screen, the regulator O-ring large, and the regulator O-ring back up, and cover the fuel pressure regulator housing to prevent contamination from entering the fuel system.
By Bob
GM Specialist
29/10/2022Q: What kind of special tool is needed when performing the fuel pressure relief procedure?
A:
You need to use the J 34730-1A Fuel Pressure Gauge.
By Bob
GM Specialist
29/10/2022Q: How to remove the Fuel Pressure Gage?
A:
First, you need to remove the fuel injector sight shield, remove the cap from the fuel pressure service connection, and install the J 34730-1A to the fuel pressure service connection, located on the fuel rail. Then, please turn the ignition on, with the engine off, place the bleed hose of the J 34730-1A into an approved gasoline container, and open the bleed valve on the J 34730-1A to bleed the air from the fuel pressure gage. Finally, you should command the fuel pump ON with a scan tool, close the bleed valve on the J 34730-1A, and inspect for fuel leaks.
By Bob
GM Specialist
29/10/2022Q: What kind of special tool is needed when replacing the Fuel Pressure Gage?
A:
You need to use the J 34730-1A Fuel Pressure Gage.
By Bob
GM Specialist
29/10/2022Q: How to perform the fuel pressure relief procedure?
A:
First, you need to disconnect the negative battery terminal and remove the fuel injector sight shield and the fuel pressure connection cap. Then, please wrap a shop towel around the fuel pressure connection, install the bleed hose into an approved container and open the valve to bleed the system pressure. Finally, you should drain any fuel remaining in the fuel pressure gauge into an approved container.
By Bob
GM Specialist
29/10/2022See more FAQs (4)