< Back ×
My Vehicle Change Vehicle
2005 Buick Park Avenue
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2005 Buick Park Avenue Sensor Asm-Inflator Restraint Side Imp
PartNumber: 25765110
Product Specifications- Notes: Park Avenue
- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.5 x 3.1 x 3.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 16267989, 9388250, 09388250
- Part Description: 2005 Buick Park Avenue Sensor Asm-Inflator Restraint Side Imp
Vehicle Fitment- 2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
FAQ for Air Bag Sensor Repair
Q: How to install the Inflatable Restraint Steering Wheel Module?
A:
First, you need to connect the horn ground lead to the lower left threaded hole in the steering wheel and connect the horn contact lead to the steering column cam tower. Then, please rotate the horn contact turn 1/4 turn clockwise to lock, connect the inflator module electrical connector and the CPA, and align the driver inflator module fasteners to the steering column fastener holes. Finally, you should push the driver inflator module firmly into the steering column to engage the fasteners, and enable the SIR system.
By Bob
GM Specialist
01/11/2022Q: How to remove the Inflatable Restraint Instrument Panel Module?
A:
First, you need to disable the SIR system, remove the yellow connector on the inflatable restraint I/P module from the yellow connector and the I/P bracket, remove the I/P upper trim pad, and note the wire harness routing position to assist in re-assembly. Then, please push the yellow connector on the inflatable restraint I/P module away from the I/P, and remove the inflatable restraint I/P module from the I/P. Finally, you should fully deploy the module before disposal.
By Bob
GM Specialist
01/11/2022Q: How to remove the Inflatable Restraint Side Impact Module Wiring Harness?
A:
First, you need to disable the SIR system. Then, please remove the inflatable restraint side impact module from the seat. Finally, you should remove the retaining clips that fasten the side impact module wiring harness to the seat.
By Bob
GM Specialist
01/11/2022Q: How to install the Inflatable Restraint Side Impact Module-Front?
A:
First, you need to install a new retainer fastener to the seat, connect the electrical connector to the inflatable restraint side impact module, and install the CPA to the electrical connector on the inflatable restraint side impact module. Then, please install the inflatable restraint side impact module to the seat, and install the 2 fasteners to the inflatable restraint side impact module. Finally, you should install the seat back panel to the seat, install the seat to the original position, and enable the SIR system.
By Bob
GM Specialist
01/11/2022Q: Deploying the inflator modules inside of the vehicle includes but is not limited to what situations?
A:
The vehicle has completed its useful life. Irreparable damage occurs to the vehicle in a non-deployment type accident. Irreparable damage occurs to the vehicle during a theft. The vehicle is being salvaged for parts to be used on a vehicle with a different VIN as opposed to rebuilding as the same VIN.
By Bob
GM Specialist
01/11/2022Q: What special tools are needed when replacing the Deployment Outside Vehicle (Steering Wheel Module, I/P Module, And Side Impact Module)?
A:
You need to use the J 38826 SIR Deployment Harness, the J 39401-B Deployment Fixture, the J 38826-50 Steering wheel module adapter, the J 38826-25 Side impact, and the I/P module adapter.
By Bob
GM Specialist
01/11/2022Q: What kind of special tool is needed when replacing the Inflatable Restraint Steering Wheel Module?
A:
You need to use the J 44298 Driver Air Bag Removal Tool.
By Bob
GM Specialist
01/11/2022Q: How to install the Inflatable Restraint Instrument Panel Module?
A:
First, you need to route the inflatable restraint I/P module pigtail down through the I/P, install the inflatable restraint I/P module to the I/P, install the mounting fasteners to the inflatable restraint I/P module, and secure the yellow connector clip to the I/P. Then, please install the I/P upper trim pad, clip the yellow connector on the inflatable restraint I/P module to the I/P bracket, and install the yellow connector on the inflatable restraint I/P module to the yellow connector on the vehicle harness. Finally, you should install the CPA to the inflatable restraint I/P module connector, install the right insulator panel, and enable the SIR system.
By Bob
GM Specialist
01/11/2022Q: What should be noted when deploying the inflator module?
A:
If the vehicle is involved in a campaign affecting the inflator modules, you should not deploy the inflator module.
By Bob
GM Specialist
01/11/2022Q: How to remove the Inflatable Restraint Side Impact Module-Front?
A:
First, you need to disable the SIR system, move the seat to the full forward position, and remove the seat back panel cover from the seat. Then, please remove the inflatable restraint side impact module from the seat, and fully deploy the module before disposal. Finally, you should remove the connector position assurance (CPA) and disconnect the electrical connector.
By Bob
GM Specialist
01/11/2022See more FAQs (23)