2005 Buick LeSabre Window Regulator

You should install the window regulator into the door through the front access hole in the door panel, install the window regulator fasteners, remove the tape from the window, lower the window into the window regulator clamps, connect the power window motor electrical connector, raise the window to the fully closed position, inspect the window for proper operation and a tight seal before installing the water deflector and the trim panel, and install the water deflector, the door module and the door trim panel.

You should remove the door trim panel, the door module, and the water deflector, tape the window in the closed position, loosen the window regulator to window clamp fasteners 4 revolutions, lower the window regulator about 1/2 way down, disconnect the electrical connector from the power window motor, remove the window regulator to inner door panel fasteners and remove the window regulator.

You should install the window regulator into the door, install the window regulator fasteners, remove the tape holding the window up, lower the window into the window regulator clamps, connect the power window motor electrical connector and raise the window to the fully up position.

You should remove the door trim panel, eel the water deflector down far enough to access the window clamp bolts, tape the window in place, through the access holes in the inner door panel, loosen the window clamp attachment bolts 4 revolutions, lower the window regulator 3/4 of the way down, disconnect the electrical connector from the window regulator motor and remove the window regulator to inner door panel fasteners and remove the window regulator.