< Back ×
My Vehicle Change Vehicle
2005 Buick LeSabre
< Back to View All
Wheel Hubs, Bearings & Seals
- Department
- Brands
- Prices
OEM (Genuine) 2005 Buick LeSabre Front Hub
PartNumber: 19259596
Product Specifications- Item Dimensions: 8.5 x 7.1 x 7.0 inches
- Item Weight: 11.70 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19433930
- Part Description: 2005 Buick LeSabre Front Hub
Vehicle Fitment- 2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
$219.54 MSRP:$414.26You Save: $194.72 (48%)
FAG® Front Wheel Bearing and Hub Assembly for 2005 Buick LeSabre
PartNumber: 102026Product Specifications- Notes: FAG Global# 102026; ABS Cable Included
- Hub Flange Mount Hole Quantity: 3
- Number of Bolt Holes: 3
- Number of Hub Bolts: 5
- UPC: 670774103063
- Part Description: 2005 Buick LeSabre Front Wheel Bearing and Hub Assembly
Vehicle Fitment- 2005 Buick LeSabre | All Trims | All Engines
$109.31
OEM (Genuine) 2005 Buick LeSabre Hub & Bearing
PartNumber: 7470555
Product Specifications- Notes: Bonneville, Lesabre
- Location: Driver Side; Passenger Side
- Item Dimensions: 7.2 x 7.1 x 8.6 inches
- Item Weight: 8.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick LeSabre Hub & Bearing
Vehicle Fitment- 2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
FAQ for Wheel Bearing Repair
Q: How to install the Wheel Bearing/Hub-Rear?
A:
You should install the brake shield and the wheel bearing/hub to the control arm, install the wheel bearing/hub retaining bolts, connect the wheel/hub electrical connector, install the brake rotor, install the tire and wheel and lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: How to remove the Wheel Bearing/Hub-Rear?
A:
You should remove the tire and wheel, remove the brake rotor, disconnect the wheel bearing/hub electrical connector, remove the wheel bearing/hub retaining bolts, remove the wheel bearing/hub lower, remove the brake shield from the lower control arm and clean the control arm face and the bore before installing the hub and the bearing.
By Bob
GM Specialist
01/11/2022Q: What tools are required to replace the Wheel Bearing/Hub-Front?
A:
You need J 28733-B Front Hub Spindle Remover.
By Bob
GM Specialist
01/11/2022Q: What should be noticed in installing the Wheel Bearing/Hub-Front?
A:
You should remove the protective plastic cover before installation. You can not handle the knuckle or hub assembly by the ABS sensor wire. Then you should carefully install the dust shield, apply a thin layer of grease to the steering knuckle bore and install the wheel bearing/hub and dust shield to the steering knuckle.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when removing the Wheel Bearing/Hub-Front?
A:
You should insert a drift punch or a screwdriver into the caliper and the rotor to prevent the rotor from turning and remove the drive axle nut and the brake rotor.
By Bob
GM Specialist
01/11/2022