< Back ×
My Vehicle Change Vehicle
2005 Buick LeSabre
< Back to View All
Fuses & Fuse Box
- Department
- Prices
OEM (Genuine) 2005 Buick LeSabre Block Asm-Engine Wiring Harness Junction
PartNumber: 21994197
Product Specifications- Other Names: Fuse & Relay Box
- Item Dimensions: 11.9 x 9.6 x 5.5 inches
- Item Weight: 3.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick LeSabre Block Asm-Engine Wiring Harness Junction
Vehicle Fitment- 2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
FAQ for Relay Boxes Repair
Q: What should be noticed when removing the Underhood Electrical Center or Junction Block?
A:
You should loosen the fasteners retaining the underhood fuse block connectors and disconnect the 4 cam lock connectors from the underhood fuse block and lift the assembly from the base.
By Bob
GM Specialist
02/11/2022Q: How to remove the Rear Electrical Center or Junction Block?
A:
You should remove the rear seat cushion, disconnect the negative battery cable, remove the rear fuse block cover, remove the positive battery cable nut and cable from the rear electrical center, release the four retaining clips, lift the electrical center and turn over and remove the three connector fasteners and remove all the connectors from the fuse block.
By Bob
GM Specialist
02/11/2022Q: What should be noticed in installing the Underhood Electrical Center or Junction Block?
A:
You should install the accumulator cover and install the wiring harness into the clip in the accumulator cover and position the positive cables onto the stud.
By Bob
GM Specialist
02/11/2022Q: How to install the Rear Electrical Center or Junction Block?
A:
You should install all the connectors to the rear fuse block and hand start the fasteners, install the rear electrical center into the base assembly, install the positive battery cable and nut, install the rear seat cushion and connect the negative battery cable.
By Bob
GM Specialist
02/11/2022