Part Description: 2005 Buick LeSabre Coolant Recovery Reservoir Hose Assembly
More Info
Vehicle Fitment
2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
FAQ for Radiator Hose Repair
Q: How to install the Radiator Hose-Outlet?
A:
You should install the inlet radiator hose to the engine, install the inlet radiator hose to the radiator, install the inlet radiator hose clamps and fill the cooling system.
By Bob
GM Specialist
01/11/2022
Q: How to remove the Radiator Hose-Inlet?
A:
You should drain the engine coolant, loosen and move the inlet radiator hose clamp at the radiator, remove the inlet radiator hose from the radiator, loosen and move the inlet radiator hose clamp at the engine and remove the inlet radiator hose from the engine.
By Bob
GM Specialist
01/11/2022
Q: How to remove the Radiator Hose-Outlet?
A:
You should drain the engine coolant, loosen and move the inlet radiator hose clamp at the radiator, remove the inlet radiator hose from the radiator, loosen and move the inlet radiator hose clamp at the engine and remove the inlet radiator hose from the engine.
By Bob
GM Specialist
01/11/2022
Q: How to install the Radiator Hose-Inlet?
A:
You should install the inlet radiator hose to the engine, install the inlet radiator hose to the radiator, install the inlet radiator hose clamps and fill the cooling system.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How do I install the Tie Bar-Upper?
A:
You should install the upper tie bar onto the vehicle, the upper tie bar fasteners, the Air Cleaner Assembly, the Radiator Support Brackets, the headlamp/fascia panel support brackets, and the headlamp/fascia panel support bracket fasteners.
Q: How to install the Water Pump?
A:
You should install the Water Pump on the engine, install the water pump mounting bolt, install the water pump pulley and bolts, install the drive belt and fill the cooling system.
Q: How do I install the Coolant Recovery Reservoir?
A:
You should install the Coolant Reservoir, install the mounting nuts and bolt, install the coolant hose to the reservoir using the J 38185 and refill the cooling system.