< Back ×
My Vehicle Change Vehicle
2005 Buick LeSabre
< Back to View All
Door Handles, Locks & Related Parts
- Department
- Prices
OEM (Genuine) 2005 Buick LeSabre Handle Asm-Front Side Door Inside *Very Dark Gray
PartNumber: 25695753
Product Specifications- Notes: Gray
- Location: Passenger Side
- Other Names: Handle, Inside
- Item Dimensions: 6.0 x 5.8 x 4.6 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick LeSabre Handle Asm-Front Side Door Inside *Very Dark Gray
Vehicle Fitment- 2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
OEM (Genuine) 2005 Buick LeSabre HANDLE, Door Lock Inside Handle
PartNumber: 25695754
Product Specifications- Notes: Gray
- Location: Driver Side
- Other Names: Handle, Inside
- Item Dimensions: 6.2 x 5.9 x 4.7 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick LeSabre HANDLE, Door Lock Inside Handle
Vehicle Fitment- 2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
OEM (Genuine) 2005 Buick LeSabre HANDLE
PartNumber: 25761892Product Specifications- Notes: Charcoal
- Location: Passenger Side
- Other Names: Handle, Inside
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick LeSabre HANDLE
Vehicle Fitment- 2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
OEM (Genuine) 2005 Buick LeSabre HANDLE, Door Lock Inside Handle
PartNumber: 25761893Product Specifications- Notes: Charcoal
- Location: Driver Side
- Other Names: Handle, Inside
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick LeSabre HANDLE, Door Lock Inside Handle
Vehicle Fitment- 2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
OEM (Genuine) 2005 Buick LeSabre Handle, Inside
PartNumber: 25761896Product Specifications- Notes: Cashmere
- Location: Passenger Side
- Other Names: Handle, Inside
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick LeSabre Handle, Inside
Vehicle Fitment- 2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
OEM (Genuine) 2005 Buick LeSabre Handle, Inside
PartNumber: 25761897Product Specifications- Notes: Cashmere
- Location: Driver Side
- Other Names: Handle, Inside
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick LeSabre Handle, Inside
Vehicle Fitment- 2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
FAQ for Interior Door Handle Repair
Q: How to remove the Door Handle-Front Inside?
A:
You should remove the door trim panel, the door module, the water deflector, and the door handle fastener, snap the lock and latch rods out of the rod guide, slide the handle assembly forward to release the retainer tabs, and tilt the handle and remove the rods.
By Bob
GM Specialist
01/11/2022Q: How to remove the Handle Bezel-Inside?
A:
You should insert a flat-bladed tool behind the forward edge of the door handle bezel, gently pry the bezel away from the door trim panel, pull the door handle about halfway open, pull the bezel forward over the inside door handle, and disconnect the electrical connector.
By Bob
GM Specialist
01/11/2022Q: What should be noticed in removing the Door Handle-Rear Inside?
A:
You should slide the inside door handle forward to release the tabs from the door and tilt the handle and remove the rods from the handle.
By Bob
GM Specialist
01/11/2022Q: How to install the Door Handle-Front Inside?
A:
You should install the rods to the inside door handle, align the retainer tabs to the slots in the door and slide the door handle rearward, snap the lock and latch rods into the rod guide, install the inside door handle fastener, install the water deflector, install the door module and install the door trim panel.
By Bob
GM Specialist
01/11/2022Q: How to remove the Assist Handle?
A:
You should rotate the assist handle downward, remove the fasteners from the assist handle and remove the handle assembly.
By Bob
GM Specialist
01/11/2022Q: How to install the Handle Bezel-Inside?
A:
You should connect the electrical connectors, if any, to the inside door handle bezel, pull the door handle about halfway open, slide the inside door handle through the opening in the door handle bezel, insert the tabs at the rear of the bezel behind the door trim panel and snap the front of the door handle bezel into place.
By Bob
GM Specialist
01/11/2022Q: How to install the Assist Handle?
A:
You should position the assist handle in the headliner and install the fasteners to secure the assist handle.
By Bob
GM Specialist
01/11/2022Q: How to remove the Assist Handle and Rear Coat Hook?
A:
You should rotate the assist handle downward, remove the fasteners from the handle assembly, remove the bulb socket assembly from the lamp assembly, disconnect the electrical connectors and remove the assist handle assembly.
By Bob
GM Specialist
01/11/2022Q: What should be cautioned in installing the Rear Inside Door Handle?
A:
You should guide the tabs on the inside door handle into the slots in the door, slide the inside door handle rearward to engage the tabs, and install the latch and lock rods into the guide clip.
By Bob
GM Specialist
01/11/2022Q: How to install the Assist Handle and Rear Coat Hook?
A:
You should connect the electrical connectors, install the bulb socket in the lamp assembly, position the pull handle and install the fasteners.
By Bob
GM Specialist
01/11/2022See more FAQs (5)