FAQ for Hvac Heater Blend Door Actuator Repair
Q: How to install the Air Temperature Actuator-Right?
A:
You should install the air temperature actuator, install the air temperature actuator screws, connect the electrical connector to the air temperature actuator, install the IPM, the knee bolster, and the left side sound insulator, and recalibrate the actuator.
By BobGM Specialist
01/11/2022 Q: How to remove the Recirculation Actuator?
A:
You should remove the instrument panel compartment, remove the right sound insulator, remove the Dash Integration Module (DIM) from the bracket, remove the rear two DIM module bracket screws, reposition the DIM module bracket to gain access to the recirculation actuator, disconnect the electrical connector from the recirculation actuator and remove the recirculation actuator screws and remove the recirculation actuator.
By BobGM Specialist
01/11/2022 Q: How to remove the Air Temperature Actuator-Left?
A:
You should remove the left-side sound insulator, remove the knee bolster, remove the instrument panel module (IPM), disconnect the electrical connector from the air temperature actuator, remove the air temperature actuator screws and remove the air temperature actuator.
By BobGM Specialist
01/11/2022 Q: How to remove the Air Temperature Actuator?
A:
You should remove the instrument panel compartment, disconnect the electrical connector from the air temperature actuator and remove the air temperature actuator screws and remove the air temperature actuator.
By BobGM Specialist
01/11/2022 Q: How to remove the Air Temperature Actuator-Right?
A:
You should remove the left-side sound insulator, remove the knee bolster, remove the instrument panel module (IPM), disconnect the electrical connector from the air temperature actuator, remove the air temperature actuator screws and remove the air temperature actuator.
By BobGM Specialist
01/11/2022 Q: How to remove the Mode Actuator?
A:
You should remove the left sound insulator, remove the knee bolster, remove the instrument panel module (IPM), disconnect the electrical connector from the mode actuator, remove the mode actuator retaining screws, and remove the mode actuator.
By BobGM Specialist
01/11/2022 Q: How to install the Recirculation Actuator?
A:
You should install the recirculation actuator, install the recirculation actuator retaining screws, connect the electrical connector to the recirculation actuator, position the DIM module bracket to the original position, install the rear two DIM module bracket screws, the DIM module into the bracket, the right sound insulator and the instrument panel compartment and recalibrate the actuator.
By BobGM Specialist
01/11/2022 Q: How to install the Air Temperature Actuator-Left?
A:
You should install the air temperature actuator, install the air temperature actuator screws, connect the electrical connector to the air temperature actuator, install the IPM, the knee bolster, and the left side sound insulator, and recalibrate the actuator.
By BobGM Specialist
01/11/2022 Q: How to install the Mode Actuator?
A:
You should align the mode door levers with the cam slots, install the mode actuator, install the mode actuator retaining screws, connect the electrical connector to the mode actuator, install the IPM, the knee bolster, the left side sound insulator and recalibrate the actuator.
By BobGM Specialist
01/11/2022 Q: How to install the Air Temperature Actuator?
A:
You should install the air temperature actuator, install the air temperature actuator screws, connect the electrical connector to the air temperature actuator, install the instrument panel compartment and recalibrate the actuator.
By BobGM Specialist
01/11/2022 See more FAQs (5)