< Back ×
My Vehicle Change Vehicle
2005 Buick LeSabre
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
Dorman® OE Solutions Front Inner Cv Joint Boot Kit for 2005 Buick LeSabre
PartNumber: 614-004Product Specifications- Notes: Uni-Fit; Joint Dia 3.5"
- Grease Type: Non-synthetic
- Joint End Inside Diameter: 3.75"
- Material: Silicone
- Number of Clamps: 2
- Rib Quantity: 6
- Shaft End Inside Diameter: 1.15"
- Split Or Solid Type: Solid
- UPC: 019495800804
- Part Description: 2005 Buick LeSabre OE Solutions Front Inner Cv Joint Boot Kit
Vehicle Fitment- 2005 Buick LeSabre | All Trims | All Engines
$25.25
Dorman® OE Solutions Front Outer Cv Joint Boot Kit for 2005 Buick LeSabre
PartNumber: 614-003Product Specifications- Notes: Uni-Fit; Joint Dia 3.44"
- Boot Color: Black
- Boot Material: Neoprene
- Joint End Inside Diameter: 4"
- Package Contents: 1 CV Joint Boot; 1 CV Joint Grease Pack; 2 Clamps
- Package Quantity: 1
- Packaging Type: Box
- Rib Quantity: 6
- Shaft End Inside Diameter: 0.98"
- Split Or Solid Type: Solid
- UPC: 019495800798
- Vented Boot: No
- Part Description: 2005 Buick LeSabre OE Solutions Front Outer Cv Joint Boot Kit
Vehicle Fitment- 2005 Buick LeSabre | All Trims | All Engines
$21.49
OEM (Genuine) 2005 Buick LeSabre Inner Boot
PartNumber: 26073372
Product Specifications- Notes: 3.05 Axle; Bonneville, Lesabre; 3.8l; Inner; W/O Supercharger; 3.05 Ratio
- Location: Driver Side; Passenger Side
- Other Names: Boot, Boot Kit, Inner Boot, Inner Boot Kit
- Item Dimensions: 7.8 x 7.0 x 6.8 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick LeSabre Inner Boot
Vehicle Fitment- 2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
OEM (Genuine) 2005 Buick LeSabre Boot Kit, Front Wheel Drive Shaft Cv Joint
PartNumber: 26044383
Product Specifications- Notes: 3.05 Axle; Bonneville, Lesabre; 3.8l; Outer; W/O Supercharger; 3.05 Ratio
- Location: Driver Side; Passenger Side
- Item Dimensions: 6.8 x 6.4 x 5.7 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2005 Buick LeSabre Boot Kit, Front Wheel Drive Shaft Cv Joint
Vehicle Fitment- 2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
OEM (Genuine) 2005 Buick LeSabre Inner Boot
PartNumber: 19177868
Product Specifications- Notes: 2.86 Axle; Bonneville, Lesabre; 3.8l; Inner; W/O Supercharger; 2.86 Ratio
- Location: Driver Side; Passenger Side
- Item Dimensions: 6.7 x 6.4 x 6.1 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26073374
- Part Description: 2005 Buick LeSabre Inner Boot
Vehicle Fitment- 2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
OEM (Genuine) 2005 Buick LeSabre Outer Boot Kit
PartNumber: 26044380
Product Specifications- Notes: 2.86 Axle; Bonneville, Lesabre; 3.8l; Outer; W/O Supercharger; 2.86 Ratio
- Location: Driver Side; Passenger Side
- Item Dimensions: 6.6 x 6.1 x 5.7 inches
- Item Weight: 0.90 Pounds
- Part Description: 2005 Buick LeSabre Outer Boot Kit
Vehicle Fitment- 2005 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
FAQ for Cv Joint Boot Repair
Q: What tools are required to replace the Wheel Drive Shaft Outer Joint and Seal?
A:
You need J 35910 Drive Axle Seal Clamp Pliers, J 41048 Drive Axle Swage Ring Clamp, and J 8059 Snap Ring Pliers.
By Bob
GM Specialist
01/11/2022Q: What should be cautioned in replacing the Wheel Drive Shaft Inner Joint and Seal?
A:
With the removal of the wheel drive shaft for any reason, the transmission sealing surface (the tripot male/female shank of the joint) should be inspected for corrosion. If corrosion is evident, the surface should be cleaned with 320 grit cloth or equivalent in a rotational motion only. Do not clean with an oscillating motion. Transmission fluid may be used to clean off any remaining debris and the joint wiped dry before installation. Corrosion on the joint sealing surface may damage the transmission seals and cause a fluid leak.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when removing the Wheel Drive Shaft Outer Joint and Seal?
A:
You should remove the large seal retaining clamp from the CV joint with a side cutter. Discard the seal retaining clamp, remove the small seal retaining clamp from the half shaft bar with a side cutter, discard the seal retaining clamp, separate the outboard seal from the CV joint outer race at the large diameter and slide the seal away from the CV joint along the bar, wipe the grease from the face of the CV joint inner race.
By Bob
GM Specialist
01/11/2022Q: What tools are required to replace the Wheel Drive Shaft Inner Joint and Seal?
A:
You need J 35910 Drive Axle Seal Clamp Pliers, J 41048 Drive Axle Swage Ring Clamp, and J 8059 Snap Ring Pliers.
By Bob
GM Specialist
01/11/2022