Part Description: 2004 GMC Yukon Motor, Windshield Wiper
More Info
Vehicle Fitment
2004 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Windshield Wiper Motors Repair
Q: What is the recommended torque when installing the two screws?
A:
You can tighten the screws to 19 N.m (14 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: What tool can you use to install the drive link onto the wiper motor crank arm?
A:
You can use the J 39529.
By Bob
GM Specialist
01/11/2022
Q: How do you replace the rear wiper motor?
A:
You can remove the following: the wiper arm, the nut and spacer from the wiper motor shaft, the interior trim panel, the two screws, and the wiper motor.
By Bob
GM Specialist
01/11/2022
Q: What tool can you use to remove the drive link from the wiper motor crank arm?
A:
You can use the J 39232.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How do you replace the washer pump?
A:
You can remove the washer solvent container and remove the Washer Pumps from the reservoir.
Q: What is the removal procedure for the wiper blade element?
A:
The procedure is to remove the Wiper Blade from the wiper arm, remove the bottom claws of the wiper blade and pull the wiper blade element out through the wiper blade claws.
Q: What is the proper way to install the washer solvent container level sensor?
A:
You can position the washer solvent container level sensor and the seal to the container and install the washer solvent container.