FAQ for Radiator Hose Repair
Q: What is the recommended torque when tightening the air cleaner outlet duct clamps?
A:
You can tighten the air cleaner outlet duct clamp screws to 7 Nm (62-inch lbs.).
By BobGM Specialist
01/11/2022 Q: What is the first step for replacing the inlet radiator hose (4.8L, 5.3L, and 6.0L Engines)?
A:
The first step is to drain the cooling system.
By BobGM Specialist
01/11/2022 Q: What tool can you use to pull on one of the open ends of the retaining ring?
A:
You can use a bent-tip screwdriver or equivalent.
By BobGM Specialist
01/11/2022 Q: What is the first step for installing the radiator vent inlet hose?
A:
The first step is to install the vent inlet hose to the surge tank.
By BobGM Specialist
01/11/2022 Q: What is the first step for replacing the outlet radiator hose (4.8L, 5.3L, and 6.0L Engines)?
A:
The first step is to drain the cooling system.
By BobGM Specialist
01/11/2022 Q: What should you ensure when installing the radiator hose quick connect fitting?
A:
You should ensure the 3 retaining ring ears can be seen from the inside of the connector and that the retaining ring can move freely in the slots.
By BobGM Specialist
01/11/2022 Q: What is the first step for installing the inlet radiator hose (4.8L, 5.3L, and 6.0L Engines)?
A:
The first step is to install the inlet hose to the water outlet.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the radiator vent inlet hose?
A:
The procedure is to drain the cooling system, reposition the vent inlet hose clamp from the radiator, remove the vent inlet hose from the radiator, reposition the vent inlet hose clamp from the surge tank and remove the vent inlet hose from the surge tank.
By BobGM Specialist
01/11/2022 See more FAQs (3)