FAQ for Power Steering Hose Repair
Q: What is the recommended torque when installing the power steering cooler to the radiator support?
A:
You can tighten the bolts retaining the power steering cooler to 5 Nm (44-inch lbs.).
By BobGM Specialist
02/11/2022 Q: What is the first step for installing the power brake booster outlet hose?
A:
The first step is to route the hose in the same position the hose occupied prior to removal.
By BobGM Specialist
02/11/2022 Q: What should you first remove when replacing the power steering cooler pipe/hose (With Hydroboost)?
A:
You should first remove the front grille.
By BobGM Specialist
02/11/2022 Q: What should you install before replacing the power brake booster outlet hose?
A:
You should install a drain pan under the vehicle.
By BobGM Specialist
02/11/2022 Q: What is the first step for installing the power steering gear outlet pipe/hose (Recirculating Ball)?
A:
The first step is to route the hose in the same position the hose occupied prior to removal.
By BobGM Specialist
02/11/2022 Q: What is the removal procedure for the power steering gear inlet pipe/hose (Without Hydroboost)?
A:
The procedure is to remove the following: the engine protection shield, the power steering gear inlet hose from the power steering pump, the power steering gear inlet hose from the power steering gear, and the power steering gear inlet hose from the vehicle.
By BobGM Specialist
02/11/2022 Q: How do you replace the power brake booster inlet hose?
A:
You can remove the following: the brake booster inlet hose from the brake boosters, the brake booster inlet hose from the power steering pump, and the brake booster inlet hose from the vehicle.
By BobGM Specialist
02/11/2022 Q: What is the recommended torque when installing the power steering gear inlet hose to the power steering gear?
A:
You can tighten both power steering gear inlet hose fittings to 28 Nm (20 ft. lbs.).
By BobGM Specialist
02/11/2022 Q: How do you replace the power steering gear inlet pipe/hose (With Hydroboost)?
A:
You can install a drain pan under the vehicle, remove the power steering gear inlet hose from the brake booster, remove the power steering gear inlet hose from the power steering gear and remove the power steering gear inlet hose from the vehicle.
By BobGM Specialist
02/11/2022 Q: What should you install before replacing the power steering gear outlet pipe/hose (Recirculating Ball)?
A:
You should install a drain pan under the vehicle.
By BobGM Specialist
02/11/2022 See more FAQs (6)