FAQ for Center Console Repair
Q: How do you replace the console compartment door?
A:
You can open the console lid, remove the four retaining screws and remove the console door from the console.
By BobGM Specialist
01/11/2022 Q: What is the first step for replacing the floor console bezel (Non-Luxury Upper)?
A:
The first step is to remove the I/P cluster bezel.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the console storage bin (Expect Pro)?
A:
The procedure is to remove the following: the console compartment door, the bin retaining screws, the 4 lower bolts, and the storage bin from the console.
By BobGM Specialist
01/11/2022 Q: How do you install the floor console bezel (Luxury Upper)?
A:
You can place the bezel on the console, connect the electrical connector, install the bezel to the console and install the I/P cluster bezel.
By BobGM Specialist
01/11/2022 Q: How do you install the floor console bezel (Non-Luxury Upper)?
A:
You can place the bezel on the console, connect the electrical connector, install the bezel to the console and install the I/P cluster bezel.
By BobGM Specialist
01/11/2022 Q: What is the first step for replacing the console (W/Console Mounting Bracket)?
A:
The first step is to remove both front seats.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque when installing the 2 retaining screws?
A:
You can tighten the screws to 7 Nm (62 lb in).
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the floor console bezel (Luxury Upper)?
A:
The procedure is to remove the I/P cluster bezel, insert a flat-bladed tool between the Bezel assembly and the console, pry the bezel from the console outwards partially, disconnect the electrical connectors and remove the bezel from the console.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the front floor console cupholder blower?
A:
The procedure is to remove the following: the console cup holder assembly, the 2 retaining screws, and the blower from the cupholder assembly.
By BobGM Specialist
01/11/2022 Q: How do you install the console (overhead)?
A:
You can install the console to the roof, connect the electrical connector and install the console roof screw.
By BobGM Specialist
01/11/2022 See more FAQs (19)