Part Description: 2004 Chevrolet S10 Motor Asm, Rear Window Wiper
More Info
Vehicle Fitment
2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
FAQ for Windshield Wiper Motors Repair
Q: How to remove the Wiper Motor?
A:
You shall remove the wiper arms, the air inlet grille panel, and the transmission and wiper motor.
By Bob
GM Specialist
01/11/2022
Q: How to install the Wiper Motor?
A:
You shall install the wiper motor, the transmission drive link socket, the air inlet grille panel, and the wiper arms.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the Rear Wiper Motor?
A:
The proper way is to install the wiper motor, the interior trim panel, the spacer, the nut, and the wiper arm.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to remove the Rear Wiper Motor?
A:
The proper way is to remove the wiper arm, the nut, the spacer, the interior trim panel, and the wiper motor.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the proper way to install the Washer Pump/Reservoir?
A:
The proper way is to install the Washer Pumps, the grommets, and the solvent container, and connect the hoses and the electrical connectors.
Q: What is the removal procedure for the Wiper Arm Blade?
A:
The procedure is to insert the hook of the wiper arm, position the Wiper Blade in the inside radius of the wiper arm hook, pull upward until the locking tab of the pivot engages the slot in the hook, and lower the wiper arm and blade.
Q: How to remove the Windshield Washer Reservoir?
A:
You shall remove the washer solvent, disconnect the electrical connectors and the hoses, and remove the solvent container, the washer pumps, and the grommets.