Part Description: 2004 Chevrolet S10 Link Asm-Rear Stabilizer Shaft
More Info
Vehicle Fitment
2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
FAQ for Sway Bar Link Repair
Q: What is the proper way to install the Stabilizer Shaft Link (4WD)?
A:
The proper way is to install the stabilizer shaft link insulators, the stabilizer shaft link spacer, and the stabilizer shaft link upper retainer.
By Bob
GM Specialist
02/11/2022
Q: What is the proper way to remove the Stabilizer Shaft Link (4WD)?
A:
The proper way is to remove the stabilizer shaft link bolt, the stabilizer shaft link insulator, the spacer, and the upper retainer.
By Bob
GM Specialist
02/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the Pitman Arm (4WD)?
A:
The procedure is to J 29107-A Pitman Arm Puller and J 6632-01 Pitman Arm Puller.
Q: What is the removal procedure for the Rear Brake Hose?
A:
The procedure is to remove the Brake Hose retainer, the brake pipe, the brake junction block mounting bolt, and the brake hose.
Q: What should be noticed while filling the Master Cylinder Reservoir?
A:
When adding fluid to the Brake Master Cylinder reservoir, you shall use only Delco Supreme 11, GM P/N 12377967 (Canadian P/N 992667), or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container.