< Back ×
My Vehicle Change Vehicle
2004 Chevrolet S10
< Back to View All
Fuel Systems
- Department
- Brands
- Prices
Dorman® Outlet Fuel Line Connector for 2004 Chevrolet S10
PartNumber: 800-153Product Specifications- Notes: Inlet; M16 x 1.50 Thread; 3/8" Tubing; Steel Line Gasket; Pkg Quantity: 1; Packaging Type: Bag
- Fitting Attachment End 1: Male O-ring - M16-1.5
- Fitting Attachment End 2: None
- Fitting Size End 1: 16 mm
- Fitting Size End 2: 3/8''
- Fuel Line Connector Design: Male O-ring
- Gasket Material: Rubber
- Material: Steel
- UPC: 019495026112
- Part Description: 2004 Chevrolet S10 Outlet Fuel Line Connector
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
$13.38
FAQ for Fuel Line Repair
Q: What is the installation procedure for the Fuel Hose/Pipes-Engine Compartment?
A:
The procedure is to install the fuel feed and return pipes, the new O-ring seals, and the chassis fuel feed and return pipes.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Fuel Hose/Pipes-Engine Compartment?
A:
The procedure is to remove the air cleaner outlet duct, disconnect the spark plug wires and the chassis fuel feed and return pipes, and remove the fuel pipes and the O-ring seals.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Fuel Hose/Pipes-Chassis?
A:
The proper way is to install the new O-ring seals, the fuel pipes, the fuel pipe retainer clip bolt, and the transmission.
By Bob
GM Specialist
01/11/2022Q: What is the proper way for servicing the Steel Fuel Line?
A:
The proper way is to cut a piece of fuel hose 100 mm (4 in) longer than the section of line to be removed, cut a section of the pipe to replace, slide the hose clamps onto the pipe, push the hose 51 mm (2 in) onto each portion of the fuel pipe, and secure fuel line to the frame.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the Fuel Hose/Pipes Assembly?
A:
The procedure is to install the fuel feed and return pipes and the fuel tank and connect the negative battery cable.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Fuel Hose/Pipes Assembly?
A:
The procedure is to remove the fuel tank and the fuel feed and return pipes and cap the fuel pipes.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Chassis Fuel Hose/Pipes?
A:
The procedure is to disconnect the chassis fuel feed and return pipes, and remove the transmission and the fuel feed and return pipes.
By Bob
GM Specialist
01/11/2022See more FAQs (2)