Part Description: 2004 Chevrolet S10 Panel, Front Wheelhouse
More Info
Vehicle Fitment
2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
FAQ for Fender Splash Shield Repair
Q: What is the proper way to install the Front Fender?
A:
The proper way is to install the fender, the vacuum tank, the electronic brake control module, the battery, the antenna mast, the base, the hood, the hood bumper, and the radiator grille.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the Sight Shield-Rear Wheelhouse Panel?
A:
The proper way is to position the sight shield on the vehicle frame and install the push-pin retainers.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the Wheelhouse Extension?
A:
The proper way is to install the wheelhouse extension and the wheelhouse extension retainers.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the Front Fender?
A:
The procedure is to remove the grille, the hood bumper, the hood, the antenna mast, the base, the battery, the radiator coolant reservoir, the electronic brake control module, the vacuum tank, and the fender.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the Wheelhouse Extension?
A:
The procedure is to remove the wheelhouse extension retainers and the wheelhouse extension.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to remove the Sight Shield-Rear Wheelhouse Panel?
A:
The proper way is to remove the push-pins and the sight shield.
By Bob
GM Specialist
01/11/2022
See more FAQs (1)
FAQ for Other Repair Info
Q: What is the proper way to remove the Front Floor Console Cupholder?
A:
The proper way is to pull up on the lower edges of the Cup Holder to release the retaining clips and remove the cup holder.
Q: What is the removal procedure for the Door Hinge Roller Pin?
A:
The procedure is to remove the Door Hinge spring, the C-clips, the door hinge roller pins, and the old bushings.
Q: What is the removal procedure for the Front Door Jamb Switch?
A:
The procedure is to remove the instrument panel sound insulator (right side only), the instrument panel sound insulator (left side only), and the Door Jamb Switch.