< Back ×
My Vehicle Change Vehicle
2004 Chevrolet S10
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2004 Chevrolet S10
PartNumber: 65-9359Product Specifications- Notes: with 29-1/8" (740 mm) Long Driveshaft;with NPI Transfer Case;Supplied as new; Measurement is taken from U-Joint to end of CV Dust Shield
- Greasable: No
- Length: 29.125"
- Length (mm): 740
- Material: Steel
- Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2004 Chevrolet S10 Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
$368.73
Cardone Reman® Remanufactured Driveshaft/ Prop Shaft for 2004 Chevrolet S10
PartNumber: 65-9329Product Specifications- Notes: with NP8 Transfer Case;with 29-3/4" (755 mm) Long Driveshaft;Supplied as new; Measurement is taken from U-Joint to end of CV Dust Shield
- Greasable: No
- Length: 29.75"
- Length (mm): 755
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 2004 Chevrolet S10 Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
$270.70
OEM (Genuine) 2004 Chevrolet S10 Shaft Kit, Front Upper Control Arm
PartNumber: 12385857
Product Specifications- Notes: Blazer/Sonoma/S10
- Item Dimensions: 4.5 x 4.5 x 17.1 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Chevrolet S10 Shaft Kit, Front Upper Control Arm
Vehicle Fitment- 2004 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, Xtreme, ZR2, ZR5 | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
$51.39 MSRP:$103.65You Save: $52.26 (51%)
OEM (Genuine) 2004 Chevrolet S10 Propeller Shaft Assembly
PartNumber: 15036984
Product Specifications- Notes: Blazer/Sonoma/S10; 4WD
- Other Names: Drive Shaft
- Item Dimensions: 39.2 x 4.0 x 3.7 inches
- Item Weight: 15.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Chevrolet S10 Propeller Shaft Assembly
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 Propeller Shaft Assembly
PartNumber: 15083841Product Specifications- Notes: S-Series; 4WD; S-10/15 Pick-Up; Crew Cab
- Other Names: Drive Shaft
- Item Dimensions: 63.3 x 4.2 x 4.2 inches
- Item Weight: 15.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15708722
- Part Description: 2004 Chevrolet S10 Propeller Shaft Assembly
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 Differential
PartNumber: 26046172
Product Specifications- Notes: W/Locking Diff; S-Series; W/Limited Slip; 3.42 Ratio
- Other Names: Axle Assembly, Case
- Item Dimensions: 11.8 x 11.2 x 10.5 inches
- Item Weight: 19.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Chevrolet S10 Differential
Vehicle Fitment- 2004 Chevrolet S10 | Base, EL, LS, SS, Tahoe, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 Front Axle Assembly (3.42 Ratio)
PartNumber: 15756008
Product Specifications- Notes: 4WD, 3.42 Gear, Auto Trans; Blazer/Sonoma/S10; 3.42 Ratio; Auto Trans
- Other Names: Axle Assembly, Differential Assembly
- Item Dimensions: 27.8 x 18.7 x 13.3 inches
- Item Weight: 70.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26046029
- Part Description: 2004 Chevrolet S10 Front Axle Assembly (3.42 Ratio)
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 Front Wheel Drive Shaft Kit
PartNumber: 93720063
Product Specifications- Notes: 4WD; 4WD, W/O High Rider, Zr2; S-Series; W/O High Wider Pkg.; Right
- Location: Passenger Side
- Other Names: Axle Assembly, Output Shaft
- Item Dimensions: 6.2 x 6.2 x 29.4 inches
- Item Weight: 16.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26055048
- Part Description: 2004 Chevrolet S10 Front Wheel Drive Shaft Kit
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 Rear Axle Drive Shaft
PartNumber: 26050549
Product Specifications- Notes: 4WD; S-Series; 4WD; All; S10/Sonoma
- Location: Driver Side; Passenger Side
- Other Names: Axle Shaft
- Item Dimensions: 32.8 x 6.6 x 6.8 inches
- Item Weight: 14.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Chevrolet S10 Rear Axle Drive Shaft
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 Front Drive Axle Clutch Shaft
PartNumber: 26042726
Product Specifications- Notes: Blazer/Sonoma/S10
- Other Names: Axle Shaft, Driven Shaft, Output Shaft
- Item Dimensions: 8.9 x 3.6 x 3.5 inches
- Item Weight: 1.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Chevrolet S10 Front Drive Axle Clutch Shaft
Vehicle Fitment- 2004 Chevrolet S10 | Base, Durango, EL, LS, Sport, Tahoe, Xtreme, ZR2, ZR5 | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 Front Drive Axle Inner Shaft
PartNumber: 26053318
Product Specifications- Notes: 4WD, All; Blazer/Sonoma/S10
- Other Names: Axle Shaft, Shaft
- Item Dimensions: 16.5 x 3.7 x 3.4 inches
- Item Weight: 4.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Chevrolet S10 Front Drive Axle Inner Shaft
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 Front Wheel Drive Shaft Kit
PartNumber: 26055053
Product Specifications- Notes: S-Series; W/High Wider Pkg.; Left
- Other Names: Axle Assembly
- Item Dimensions: 28.9 x 6.0 x 6.0 inches
- Item Weight: 17.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Chevrolet S10 Front Wheel Drive Shaft Kit
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 Front Wheel Drive Shaft Kit
PartNumber: 26055049Product Specifications- Notes: S-Series; W/High Wider Pkg.; Right
- Other Names: Axle Assembly
- Item Dimensions: 34.2 x 5.3 x 5.2 inches
- Item Weight: 17.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Chevrolet S10 Front Wheel Drive Shaft Kit
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 Front Wheel Drive Shaft Kit
PartNumber: 26055052Product Specifications- Notes: 4WD, W/O High Rider, Zr2; 4WD
- Location: Driver Side
- Other Names: Axle Assembly, Output Shaft
- Item Dimensions: 29.3 x 5.8 x 5.7 inches
- Item Weight: 19.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Chevrolet S10 Front Wheel Drive Shaft Kit
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 Driveshaft
PartNumber: 15756009Product Specifications- Notes: 4WD, 3.42 Gear, Manual Trans; Blazer/Sonoma/S10; 3.42 Ratio; Manual Trans
- Part Description: 2004 Chevrolet S10 Driveshaft
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 Driveshaft
PartNumber: 15756010
Product Specifications- Notes: 4WD, 3.73 Gear, Auto Trans
- Part Description: 2004 Chevrolet S10 Driveshaft
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 Driveshaft
PartNumber: 15756011Product Specifications- Notes: Blazer/Sonoma/S10; 3.73 Ratio; Auto Trans
- Part Description: 2004 Chevrolet S10 Driveshaft
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 Driveshaft
PartNumber: 15756012Product Specifications- Notes: 4WD, 3.73 Gear, Manual Trans; Blazer/Sonoma/S10; 3.73 Ratio; Manual Trans
- Part Description: 2004 Chevrolet S10 Driveshaft
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 Driveshaft
PartNumber: 93720062Product Specifications- Notes: S-Series; W/O High Wider Pkg.; Left
- Part Description: 2004 Chevrolet S10 Driveshaft
Vehicle Fitment- 2004 Chevrolet S10 | LS, ZR5 | 6 Cyl 4.3 L GAS
FAQ for Driveshaft Repair
Q: What should be learned about while installing the Propeller Shaft-One Piece?
A:
You shall install a new universal joint whenever a slip joint or companion flange is serviced.
By Bob
GM Specialist
29/10/2022Q: What should be noticed while removing the Propeller Shaft-One Piece?
A:
When removing the propeller shaft, you must not attempt to remove the shaft by pounding on the yoke ears or using a tool between the yoke and the universal joint.
By Bob
GM Specialist
29/10/2022Q: What should be noticed while installing the Front Propeller Shaft?
A:
You shall ensure that the propeller shaft assembly is fully engaged into the slip yoke. The retaining ring will produce a snapping noise when the shaft is properly engaged.
By Bob
GM Specialist
29/10/2022Q: What is the proper way to install the Front Propeller Shaft?
A:
The proper way is to install the shaft and the front propeller shaft yoke clamp bolts.
By Bob
GM Specialist
29/10/2022Q: What is the proper way to remove the Propeller Shaft-Two Piece?
A:
The proper way is to remove the center bearing support bracket and the rear propeller shaft.
By Bob
GM Specialist
29/10/2022Q: What is the installation procedure for the Propeller Shaft-Two Piece?
A:
The procedure is to install the front propeller shaft, the rear propeller shaft, and the bolts of the center bearing to the crossmember.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the Front Propeller Shaft?
A:
The procedure is to remove the front propeller shaft bolts and yoke clamp and the propeller shaft.
By Bob
GM Specialist
29/10/2022See more FAQs (2)