Part Description: 2004 Chevrolet S10 Rod Kit, Steering Linkage Outer Tie
More Info
Vehicle Fitment
2004 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, Xtreme, ZR2, ZR5 | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
FAQ for Center Link Repair
Q: What should be removed to get access to the Relay Rod (4WD)?
A:
You shall remove the steering linkage shield.
By Bob
GM Specialist
01/11/2022
Q: What kind of tools will be required in the replacement of the Relay Rod (4WD)?
A:
The tools required include J 6627-A Tie Rod Puller and J 24319-B Steering Linkage and Tie Rod Puller.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the Pitman Arm (4WD)?
A:
The procedure is to J 29107-A Pitman Arm Puller and J 6632-01 Pitman Arm Puller.
Q: What is the proper way to install the Tie Rod (ZR2 Models)?
A:
The proper way is to install the rear tie rod, the rear tie rod mounting bolt, the washers, and the rear tie rod mounting nut to the frame bracket and to the axle bracket respectively.
Q: What should be noticed while removing the Idler Arm (4WD)?
A:
You shall use the proper tool to separate all ball joints.