< Back ×
My Vehicle Change Vehicle
2004 Chevrolet S10
< Back to View All
Alignment Kits
- Department
- Prices
OEM (Genuine) 2004 Chevrolet S10 Insulator Bolt
PartNumber: 11561577
Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 4.9 x 1.7 x 1.2 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15552707, 14094731, 3539980, 03539980, 11518533, 14032535, 15677731
- Part Description: 2004 Chevrolet S10 Insulator Bolt
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
$7.59 MSRP:$12.04You Save: $4.45 (37%)
OEM (Genuine) 2004 Chevrolet S10 Adjust Cam
PartNumber: 14063058
Product Specifications- Notes: 4WD
- Location: Driver Side; Passenger Side
- Other Names: Adjust Cam, Lateral Arm Cam
- Item Dimensions: 2.3 x 2.4 x 0.3 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Chevrolet S10 Adjust Cam
Vehicle Fitment- 2004 Chevrolet S10 | Baja, Base, EL, LS, SS, Tahoe, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
$18.62 MSRP:$29.68You Save: $11.06 (38%)
OEM (Genuine) 2004 Chevrolet S10 Bolt-Hexagon Head M12X1.75X100, 30 Thread, 10.9, 7112M Machine
PartNumber: 11516664
Product Specifications- Notes: 4WD
- Location: Driver Side; Passenger Side
- Other Names: Adjust Cam Bolt
- Item Dimensions: 6.6 x 2.9 x 0.9 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 11508185, 561852, 00561852, 11514386, 11505584
- Part Description: 2004 Chevrolet S10 Bolt-Hexagon Head M12X1.75X100, 30 Thread, 10.9, 7112M Machine
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
FAQ for Camber and Alignment Kit Repair
Q: What should be learned about before adjusting Front Caster and Camber (RWD)?
A:
Before you adjust caster and camber angles, you shall raise and release the front bumper, do this twice to allow the vehicle to return to a normal height.
By Bob
GM Specialist
01/11/2022Q: What should be noticed while measuring the Z Height?
A:
All dimensions are measured vertically to the ground. Cross vehicle Z heights should be within 12 mm (0.47 inch) for all vehicles except pickups with options QZ8 and V4A to be considered correct. Pickups with options QZ8 and V4A should be O mm to be considered correct.
By Bob
GM Specialist
01/11/2022Q: What should be learned about while measuring the Wheel Alignment?
A:
When performing adjustments to vehicles requiring a 4-wheel alignment, you shall set the rear wheel alignment angles first to obtain proper front alignment angles.
By Bob
GM Specialist
01/11/2022Q: What should be noticed while measuring the D Height?
A:
You shall measure the metal-to-metal contact points of the rear axle to the frame on the inboard side of the leaf springs.
By Bob
GM Specialist
01/11/2022