Part Description: 2004 Chevrolet S10 Master Cylinder Bleeding Tool
More Info
Vehicle Fitment
2004 Chevrolet S10 | All Trims | All Engines
FAQ for Brake Master Cylinder Bleeder Tool Repair
Q: What should be noticed before bleeding the Hydraulic Brake System (Pressure)?
A:
When adding fluid to the brake master cylinder reservoir, you shall use only Delco Supreme 11, GM P/N 12377967 (Canadian P/N 992667), or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container.
By Bob
GM Specialist
28/10/2022
Q: What should be noticed while bleeding the Hydraulic Brake System (Manual)?
A:
If the brake system warning lamp remains illuminated, you must not allow the vehicle to be driven until it is diagnosed and repaired.
By Bob
GM Specialist
28/10/2022
Q: What kind of tools will be required while bleeding the Hydraulic Brake System (Pressure)?
A:
The tools required include J29532 Diaphragm Type Brake Pressure Bleeder and J35589-A Brake Pressure Bleeder Adapter.
By Bob
GM Specialist
28/10/2022
Q: What should be noticed before bleeding the master cylinder bench?
A:
When adding fluid to the brake master cylinder reservoir, you shall use only Delco Supreme 11, GM P/N 12377967 (Canadian P/N 992667), or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container.
By Bob
GM Specialist
28/10/2022
Q: Under what kind of condition should the two-person bleed procedure be used?
A:
The conditions of installing a new Electro-Hydraulic Control Unit (EHCU) or new Brake Pressure Modulator Valve (BPMV). and of air being trapped in the valve body.
By Bob
GM Specialist
28/10/2022
FAQ for Other Repair Info
Q: What should be noticed while filling the Master Cylinder Reservoir?
A:
When adding fluid to the Brake Master Cylinder reservoir, you shall use only Delco Supreme 11, GM P/N 12377967 (Canadian P/N 992667), or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container.
Q: How to remove the Vacuum Brake Booster?
A:
You shall remove the master cylinder, the left closeout/insulator panel, the stop lamp switch, the pushrod, the steering column support bracket, the vacuum booster assembly, and the gasket.