< Back ×
My Vehicle Change Vehicle
2004 Chevrolet S10
< Back to View All
Transmissions Components & Shifters
- Department
- Brands
- Prices
OEM (Genuine) 2004 Chevrolet S10 Extension Housing Seal
PartNumber: 24232325
Product Specifications- Notes: S-Series
- Other Names: Extension Housing Seal
- Item Dimensions: 3.7 x 3.8 x 1.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24201470
- Part Description: 2004 Chevrolet S10 Extension Housing Seal
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
$13.93 MSRP:$23.03You Save: $9.10 (40%)
National® Automatic Transmission Extension Housing Seal for 2004 Chevrolet S10
PartNumber: 4333NProduct Specifications- Notes: Boot Type; w/1.500in Width; w/New Process 233C Transfer Case; 2Spd; w/Part Time 4WD
- Type: 79
- Part Description: 2004 Chevrolet S10 Automatic Transmission Extension Housing Seal
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
$15.77
National® Automatic Transmission Extension Housing Seal for 2004 Chevrolet S10
PartNumber: 710928Product Specifications- Notes: Dual Lip; w/New Process 233C Transfer Case; 2Spd; w/Part Time 4WD
- Housing Bore (Inch): 2.680 in
- Housing Bore (mm): 68.070 mm
- Inside Diameter (Inch): 1.938 in
- Inside Diameter (mm): 49.230 mm
- Material: Polyacrylate
- Outside Diameter (Inch): 2.685 in
- Outside Diameter (mm): 68.200 mm
- Sealing Material: Polyacrylate
- Series: 710900
- Shaft (Inch): 1.938 in
- Shaft (mm): 49.230 mm
- Thickness (Inch): 0.500 in
- Thickness (mm): 12.700 mm
- Type: 32
- Width (Inch): 0.500 in
- Width (mm): 12.700 mm
- Part Description: 2004 Chevrolet S10 Automatic Transmission Extension Housing Seal
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
$7.26
FAQ for Automatic Transmission Extension Housing Seal Repair
Q: What is the removal procedure for the Transmission Extension Housing Assembly?
A:
The procedure is to remove the propeller shaft, the transmission mount, the case extension, and the case extension O-ring seal.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Transmission Extension Housing Assembly?
A:
The proper way is to install a new case extension O-ring seal, the case extension, the transmission mount, and the propeller shaft.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Transmission Housing Oil Seal-Rear (4WD)?
A:
The proper way is to install the rear output shaft seal and the transfer case and check the transmission oil level.
By Bob
GM Specialist
28/10/2022Q: What kind of tools will be required in the replacement of the Transmission Housing Oil Seal-Rear (4WD)?
A:
The tools required include J36825 Universal Seal Remover, J23907 Slide Hammer, J36502-2A Shaft Seal Protector/Installer, and J36502 Extension Housing Seal Installer.
By Bob
GM Specialist
28/10/2022Q: What is the proper way to install the Transmission Extension Housing Rear Oil Seal?
A:
The proper way is to install the seal and the propeller shaft.
By Bob
GM Specialist
28/10/2022Q: What is the proper way to remove the Transmission Extension Housing Rear Oil Seal?
A:
The proper way is to remove the propeller shaft and the case extension housing rear oil seal.
By Bob
GM Specialist
28/10/2022See more FAQs (1)