< Back ×
My Vehicle Change Vehicle
2004 Chevrolet S10
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2004 Chevrolet S10 Sensor, Pass Compartment Inflator Restraint Discriminating
PartNumber: 16240665
Product Specifications- Location: Driver Side
- Other Names: Front Sensor, Impact Sensor, Sensor
- Item Dimensions: 5.8 x 5.5 x 5.5 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Chevrolet S10 Sensor, Pass Compartment Inflator Restraint Discriminating
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2004 Chevrolet S10 Sensor, Pass Compartment Inflator Restraint Discriminating
PartNumber: 16240655
Product Specifications- Location: Passenger Side
- Other Names: Front Sensor, Impact Sensor, Sensor
- Item Dimensions: 7.0 x 6.4 x 4.5 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Chevrolet S10 Sensor, Pass Compartment Inflator Restraint Discriminating
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
FAQ for Air Bag Sensor Repair
Q: What is the removal procedure for the Inflatable Restraint I/P Module Disable Switch?
A:
The procedure is to remove the trim plate-I/P accessory panel and the switch and disconnect the electrical connections as needed.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Inflatable Restraint I/P Module Disable Switch?
A:
The proper way is to connect the electrical connections as needed and install the switch to the instrument panel.
By Bob
GM Specialist
01/11/2022Q: What should be noted when inspecting the component in an accident with or without inflator module deployment?
A:
Proper operation of the Supplemental Inflatable Restraint (SIR) sensing system requires that any repairs to the vehicle structure return the vehicle structure to the original production configuration.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Inflatable Restraint End Discriminating Sensor?
A:
The procedure is to remove the off-road skid plate if equipped, the connector position assurance (CPA), and the inflatable restraint front-end discriminating sensor.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Inflatable Restraint End Discriminating Sensor?
A:
The proper way is to install the inflatable restraint front-end discriminating sensor, the connector position assurance (CPA), and the off-road skid plate.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to arm and disarm the Air Bag(s)-Zone 1?
A:
The proper way is to turn the steering wheel, turn OFF the ignition, remove the key, the SIR fuse, and the connector position assurance (CPA), and disconnect the inflatable restraints front end discriminating sensor connectors.
By Bob
GM Specialist
28/10/2022Q: What should be noticed while arming and disarming the Air Bag(s)-Zone 1?
A:
With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate a SIR system malfunction.
By Bob
GM Specialist
28/10/2022Q: What is the proper way to arm and disarm the Air Bag(s)-Zone 3?
A:
The proper way is to remove the key, install the CPA, the SIR fuse, and the knee bolster, and turn ON the ignition with the engine OFF.
By Bob
GM Specialist
28/10/2022Q: What is the proper way to arm and disarm the Air Bag(s)-Zone 5?
A:
You shall turn OFF the ignition, remove the key from the ignition, the SIR fuse, and the CPA, and disconnect the I/P module yellow 2-way connector.
By Bob
GM Specialist
28/10/2022Q: What is the proper way to arm and disarm the Air Bag(s)-Zone 8?
A:
The proper way is to remove the key from the ignition, install the CPA, the SIR fuse, and the knee bolster, and turn ON the ignition with the engine OFF.
By Bob
GM Specialist
28/10/2022See more FAQs (5)