Other Names: Modulator Valve, Pressure Valve, Valve Assembly
Item Dimensions: 8.3 x 7.3 x 6.1 inches
Item Weight: 5.40 Pounds
Fitment Type: Direct Replacement
Replaces: 88982317
Part Description: 2004 Chevrolet S10 Valve Assembly
More Info
Vehicle Fitment
2004 Chevrolet S10 | Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
FAQ for Abs Control Module Repair
Q: What should be cautioned about when installing the Electronic Brake Control Module (EBCM)?
A:
You must not reuse the old mounting screws, and always install new mounting screws with the new EBCM. you must not use RTV or any other type of sealant on the EBCM gasket or mating surfaces.
By Bob
GM Specialist
01/11/2022
Q: What should be noticed before removing the Electronic Brake Control Module (EBCM)?
A:
You shall thoroughly wash all contaminants from around the EHCU. The area around the EHCU must be free from loose dirt to prevent contamination of disassembled ABS components.
By Bob
GM Specialist
01/11/2022
Q: Under what conditions does the IPC illuminate the ABS indicator?
A:
The Electronic Brake Control Module (EBCM) detects an ABS-disabling malfunction, the IPC performs the bulb check, or the IPC detects a loss of class 2 communications with the EBCM.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be learned about while removing the Park Brake Shoe?
A:
The brake caliper and mounting bracket do not have to be separated, you shall relocate the brake caliper and bracket to the side and secure them.
Q: What should be noted when removing the Wheel Speed Sensor (4WD Pickup)?
A:
You must not attempt to remove the stainless steel shim from the bearing assembly. If the shim is damaged or bent, you shall replace the bearing assembly.