< Back ×
My Vehicle Change Vehicle
2004 Chevrolet S10
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
OEM (Genuine) 2004 Chevrolet S10 Hose & Tube Assembly Seal Kit
PartNumber: 2724577
Product Specifications- Notes: 4.3 Liter, To Compressor
- Other Names: Hose & Tube Assembly Seal Kit, Seal, Seal Kit
- Item Dimensions: 5.2 x 4.9 x 0.3 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Chevrolet S10 Hose & Tube Assembly Seal Kit
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
$7.62 MSRP:$13.79You Save: $6.17 (45%)
Four Seasons® A C System O Ring And Gasket Kit for 2004 Chevrolet S10
PartNumber: 26742Product Specifications- Notes: O-Ring and Gasket Seal Kit
- Material: Green O-Rings, Black Aluminum Gaskets
- Style: O-Ring & Gasket Kit
- UPC: 096361267428
- Part Description: 2004 Chevrolet S10 A C System O Ring And Gasket Kit
Vehicle Fitment- 2004 Chevrolet S10 | All Trims | All Engines
$5.10
OEM (Genuine) 2004 Chevrolet S10 Line O-Ring
PartNumber: 52454646
Product Specifications- Notes: 4.3 Liter, To Accumulator
- Item Dimensions: 3.7 x 3.0 x 0.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Chevrolet S10 Line O-Ring
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
$1.06 MSRP:$1.89You Save: $0.83 (44%)
OEM (Genuine) 2004 Chevrolet S10 SEAL, A/C Condenser
PartNumber: 15963649
Product Specifications- Notes: 4.3 Liter
- Other Names: Condenser Seal
- Item Dimensions: 27.6 x 1.7 x 0.7 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Chevrolet S10 SEAL, A/C Condenser
Vehicle Fitment- 2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 6 Cyl 4.3 L GAS
FAQ for A/C System Seal Kit Repair
Q: What should be noted when removing the Sealing Washer?
A:
You must not reuse the sealing washer.
By Bob
GM Specialist
28/10/2022Q: What should be noticed while removing the O-Ring?
A:
You shall cap or tape the open A/C refrigerant components immediately to prevent system contamination.
By Bob
GM Specialist
28/10/2022Q: What should be learned about while installing the Sealing Washer?
A:
After tightening the A/C components, there should be a slight sealing washer gap of approximately 1.2 mm (3/64 in) between the A/C line and the A/C component.
By Bob
GM Specialist
28/10/2022Q: What should be noted when installing the O-Ring?
A:
You must not allow any of the mineral base 525 viscosity refrigerant oil on the new O-ring seal to enter the refrigerant system.
By Bob
GM Specialist
28/10/2022Q: What should be learned about before servicing the Compressor Sealing Washers?
A:
If you use the correct washers, there should be a space of 1.2 mm (0.047 in) between the suction/discharge hose block and the compressor rear head.
By Bob
GM Specialist
28/10/2022