Notes: with Propshaft Code CNR;with 29-1/8" (740 mm) Long Driveshaft;with NP1 Transfer Case;Supplied as new; Measurement is taken from U-Joint to end of CV Dust Shield
Greasable: No
Length: 29.125"
Length (mm): 740
Material: Steel
Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
Product Condition: Remanufactured
Part Description: 2004 Chevrolet Blazer Remanufactured Driveshaft/ Prop Shaft
Notes: with 29-1/2" (749 mm) Long Driveshaft;with Propshaft Code GYO;Measurement is taken from end of input shaft to center of U-Joint
Greasable: No
Length: 29.5"
Length (mm): 749,3
Material: Steel
Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
Product Condition: Remanufactured
Part Description: 2004 Chevrolet Blazer Remanufactured Driveshaft/ Prop Shaft
Notes: with Propshaft Code GWO;with 35-3/8" (898 mm) Long Driveshaft;Measurement is taken from end of input shaft to center of U-Joint
Greasable: No
Length: 35.375"
Length (mm): 898
Material: Steel
Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
Product Condition: Remanufactured
Part Description: 2004 Chevrolet Blazer Remanufactured Driveshaft/ Prop Shaft
Notes: with 36-3/8" (924 mm) Long Driveshaft;with Propshaft Code HJO;Measurement is taken from end of input shaft to center of U-Joint
Greasable: Yes
Length: 36.375"
Length (mm): 923,925
Material: Steel
Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
Product Condition: Remanufactured
Part Description: 2004 Chevrolet Blazer Remanufactured Driveshaft/ Prop Shaft
Notes: with 29-3/4" (755 mm) Long Driveshaft;with NP8 Transfer Case;Measurement is taken from U-Joint to end of CV Dust Shield
Greasable: No
Length: 29.75"
Length (mm): 755
Material: Steel
Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
Product Condition: Remanufactured
Part Description: 2004 Chevrolet Blazer Remanufactured Driveshafts