< Back ×
My Vehicle Change Vehicle
2004 Cadillac SRX
< Back to View All
Wipers & Washers
- Department
- Brands
- Prices
OEM (Genuine) 2004 Cadillac SRX Front Motor
PartNumber: 19354906
Product Specifications- Notes: Srx
- Other Names: Front Motor, Wiper Motor
- Item Dimensions: 11.2 x 8.3 x 6.1 inches
- Item Weight: 4.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12487632, 88958251
- Part Description: 2004 Cadillac SRX Front Motor
Vehicle Fitment- 2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
$330.68 MSRP:$598.54You Save: $267.86 (45%)
Cardone Reman® Remanufactured Wiper Motor for 2004 Cadillac SRX
PartNumber: 40-1065Product Specifications- Notes: Motor without Washer Pump
- E-Waste: Yes
- Mounting Hole Quantity: 3
- Mounting Type: Grommet
- Package Contents: Wiper Motor, Instruction Manual
- Product Condition: Remanufactured
- Product Packing Weight: 2.05 lbs
- Terminal Type: Blade
- Washer Pump Included: No
- Part Description: 2004 Cadillac SRX Remanufactured Wiper Motor
Vehicle Fitment- 2004 Cadillac SRX | All Trims | All Engines
$117.34
Cardone Reman® Remanufactured Wiper Motor for 2004 Cadillac SRX
PartNumber: 40-1064Product Specifications- Notes: Motor without Washer Pump
- E-Waste: Yes
- Mounting Hole Quantity: 3
- Mounting Type: Direct Bolt
- Package Contents: Wiper Motor, Instruction Manual
- Product Condition: Remanufactured
- Product Packing Weight: 2.5 lbs
- Terminal Type: Blade
- Washer Pump Included: No
- Part Description: 2004 Cadillac SRX Remanufactured Wiper Motor
Vehicle Fitment- 2004 Cadillac SRX | All Trims | All Engines
$121.81
OEM (Genuine) 2004 Cadillac SRX Motor, Rear Window Wiper
PartNumber: 25805170
Product Specifications- Notes: Srx
- Other Names: Rear Motor, Wiper Motor
- Item Dimensions: 8.3 x 8.4 x 13.3 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25762704, 25772721
- Part Description: 2004 Cadillac SRX Motor, Rear Window Wiper
Vehicle Fitment- 2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2004 Cadillac SRX Windshield Wiper Motors
PartNumber: 25763091Product Specifications- Part Description: 2004 Cadillac SRX Windshield Wiper Motors
Vehicle Fitment- 2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
FAQ for Windshield Wiper Motors Repair
Q: How do you install the wiper motor module grommet?
A:
You can install the round, oval, and pin wiper motor module grommets, place the wiper motor module into the vehicle, connect the wiper motor module electrical connector, align the wiper module locator hole to the pin, align the locator hole to the hole in the pillar flange, install the outer fastener, install the center fastener, install the air inlet grille, install the wiper arm assemblies and install the wiper motor fuse in the underhood fuse block.
By Bob
GM Specialist
01/11/2022Q: How do you install the wiper motor module?
A:
You can place the wiper motor module into the vehicle, connect the wiper motor module electrical connector, align the wiper module locator hole to the pin, align the locator hole to the hole in the pillar flange, install the outer bolt and the center bolt, install the air inlet grille, install the wiper arm assemblies and install the wiper motor fuses to the underhood fuse block.
By Bob
GM Specialist
01/11/2022Q: How do you replace the wiper motor?
A:
You can remove the wiper motor module assembly, the drive links, and the 3 screws retaining the wiper motor to the wiper motor module and the wiper motor.
By Bob
GM Specialist
01/11/2022Q: How do you install the liftgate wiper motor?
A:
You can lubricate the wiper motor shaft with windshield washer fluid, install the wiper motor attaching bolts and the rear wiper arm, connect the wire connector to the wiper motor, connect the fluid line to the wiper motor and install the interior liftgate trim panel.
By Bob
GM Specialist
01/11/2022Q: How do you replace the wiper motor module grommet?
A:
You can remove the wiper motor fuse, the wiper arm assemblies, the air inlet grille, and the wiper motor module mounting bolts, disconnect the wiper motor electrical connector, remove the wiper motor module and remove the round, oval, and pin wiper motor module grommets.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the liftgate wiper motor?
A:
The procedure is to remove the interior liftgate trim panel, disconnect the fluid line and the wire connector, remove the rear wiper arm and the wiper motor attaching bolts, and pull the wiper motor through the shaft grommet.
By Bob
GM Specialist
01/11/2022Q: How do you install the front wiper motor cover?
A:
You can ensure the wiper motor cover housing sealing surface is clean and dry, position the wiper motor cover to the wiper motor housing, install the wiper motor cover fasteners, tighten the fasteners in an °X° pattern and install the wiper motor module.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the front wiper motor cover?
A:
The procedure is to remove the wiper motor module, the fasteners, and the wiper motor cover.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the wiper motor?
A:
You can install the wiper motor, the drive links, and the wiper motor module assembly, operate the wipers, and check for proper operation.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the wiper motor module?
A:
The procedure is to remove the wiper motor mini 10 A and 30 A fuses, the wiper arm assemblies, the air inlet grille, and the wiper motor module mounting bolts, disconnect the wiper motor electrical connector and remove the wiper motor module.
By Bob
GM Specialist
01/11/2022See more FAQs (5)