< Back ×
My Vehicle Change Vehicle
2004 Cadillac SRX
< Back to View All
Power Sunroof & Convertible Top
- Department
- Prices
OEM (Genuine) 2004 Cadillac SRX Actuator
PartNumber: 15932104
Product Specifications- Notes: Frame Hardware, Sunroof Glass Components, Sunroof Glass; Srx
- Other Names: Actuator, Motor
- Item Dimensions: 9.4 x 3.1 x 11.3 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25747549
- Part Description: 2004 Cadillac SRX Actuator
Vehicle Fitment- 2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
$429.85 MSRP:$811.06You Save: $381.21 (48%)
OEM (Genuine) 2004 Cadillac SRX Motor, Sun Roof Rear Sunshade (W/Control Module)
PartNumber: 15140328
Product Specifications- Notes: SRX; Rear; Frame Hardware, Vent Glass Components, Rear Sunshade
- Other Names: Motor, Window Shade Motor
- Item Dimensions: 9.4 x 3.1 x 11.3 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac SRX Motor, Sun Roof Rear Sunshade (W/Control Module)
Vehicle Fitment- 2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2004 Cadillac SRX Motor, Roof Vent Window (W/Control Module)
PartNumber: 25747545
Product Specifications- Notes: Frame Hardware, Vent Glass Components, Vent Glass
- Other Names: Motor
- Item Dimensions: 11.2 x 9.0 x 2.8 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac SRX Motor, Roof Vent Window (W/Control Module)
Vehicle Fitment- 2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2004 Cadillac SRX Motor, Sun Roof Front Sunshade (W/Control Module)
PartNumber: 25747548
Product Specifications- Notes: Frame Hardware, Sunroof Glass Components, Sunshade; SRX; Front
- Other Names: Motor, Window Shade Motor
- Item Dimensions: 9.3 x 6.1 x 5.3 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac SRX Motor, Sun Roof Front Sunshade (W/Control Module)
Vehicle Fitment- 2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
FAQ for Sunroof Motor Repair
Q: How do you replace the rear sunshade sunroof motor/actuator block assembly?
A:
You can open the rear sunshade, remove the center window, the rear sunroof vent window, the rear sunroof sunshade motor/actuator, the rear sunshade assembly and either the rear left or rear right sunroof rear window track, cut the tie straps, release the drive and return tubes, hold onto the motor block, pry the return tube from the motor block, remove the drive and return tubes and remove the sunshade motor/actuator block.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the sunroof motor/actuator?
A:
The procedure is to slide the front window cable guide assembly completely forward, connect the motor/actuator electrical harness, install the sunroof front window motor/actuator, rock the motor/actuator, install the 3 motor/actuator screws, the front sunroof window and the center sunroof window and perform the window initialization procedure.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the rear sunshade sunroof motor/actuator block assembly?
A:
You can position the drive and return tubes to the motor block, secure the return tube to the motor block, position the rear sunroof sunshade motor/actuator block assembly to the motor compartment, install 2 motor/actuator screws, install either the rear left or rear right sunroof rear window track, install the rear sunshade assembly, install the rear sunshade motor/actuator, secure the electrical harness to the drive and return tubes, install the rear sunroof vent window and the center window, close the rear sunshade and perform the rear vent window/sunshade initialization process.
By Bob
GM Specialist
01/11/2022Q: How do you replace the front sunshade sunroof motor/actuator block assembly?
A:
You can open the front sunshade, remove the center window, the front sunroof window, the front sunroof sunshade motor/actuator, the front sunshade assembly and either the front left or front right sunroof front window track, cut the tie straps, release the return tube, hold onto the motor block, remove the drive and return tubes and remove the front sunshade motor/actuator block assembly.
By Bob
GM Specialist
01/11/2022Q: What tool can you use to cut the pin off above the sheet metal?
A:
You can use a body shop reciprocating saw or hack saw.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the front sunshade sunroof motor/actuator block assembly?
A:
You can position the drive and return tubes to the motor block, secure the return tube to the motor block, position the front sunroof/sunshade motor/actuator block assembly to the motor compartment, install 2 motor/actuator screws, install either the front left or front right sunroof front window track, install the front sunshade assembly, remove the motor/actuator screws, install the front sunshade motor/actuator, secure the electrical harness to the drive and return tubes, install the front sunroof window, install the center window, close the front sunshade and perform the front window/sunshade initialization process.
By Bob
GM Specialist
01/11/2022Q: How do you replace the sunroof motor/actuator?
A:
You can remove the center sunroof window, disconnect the motor/actuator electrical harness, remove the motor/actuator to motor/actuator block screws, pull the sunroof motor/actuator up and remove the applicable motor/actuator.
By Bob
GM Specialist
01/11/2022Q: How do you install the rear vent window sunroof motor/actuator block assembly?
A:
You can position the drive and return tubes to the motor block, secure the return tube to the motor block, position the vent window motor/actuator block assembly to the motor compartment, install 2 motor/actuator screws, install either the rear left or rear right sunroof rear window track, install the rear sunshade assembly and the rear vent window motor/actuator, secure the electrical harness to the drive and return tubes, install the rear sunroof vent window, install the center window, close the rear sunshade and perform the rear vent window/sunshade initialization process.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the rear vent window sunroof motor/actuator block assembly?
A:
The procedure is to open the rear sunshade, remove the center window, the rear sunroof vent window, the rear sunroof vent window motor/actuator, the rear sunshade assembly and either the rear left or rear right sunroof rear window track cut the tie straps, release the drive and return tubes, hold onto the motor block, pry the return tube from the motor block, remove the drive and return tubes and remove the vent window motor/actuator block.
By Bob
GM Specialist
01/11/2022See more FAQs (4)