Notes: Gap 0.032; Resistor Plug w/Patented U-Groove Design
Center Electrode Core Material: Copper
Center Electrode Tip Material: Nickel
Ground Configuration: Standard
Ground Electrode Core Material: Nickel
Ground Electrode Quantity: 1
Ground Electrode Tip Design: U-Groove
Hex Size: 16.0
Manufacturer Heat Range: 16
Pre-Gap Size: 0.032
Reach: 18.00
Resistance: 5000
Seat Type: Tapered
UPC: 042511050228
Part Description: 2004 Cadillac SRX Original U-Groove™ Spark Plug
More Info
Vehicle Fitment
2004 Cadillac SRX | All Trims | 8 Cyl 4.6L
FAQ for Spark Plug Repair
Q: What is the proper way to install the spark plug?
A:
You can ensure that the spark plug gap is equivalent to the spark plug gap specification and install the spark plug and the ignition coil.
By Bob
GM Specialist
01/11/2022
Q: How do you replace the spark plug?
A:
You can turn the ignition OFF, remove the ignition coil, remove debris from the spark plug cavity and remove the spark plug.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the engine oil and oil filter?
A:
The procedure is to turn the ignition OFF, remove the Oil Filter cap, remove the oil filter cartridge, raise the vehicle, place a suitable drain below the oil pan drain plug, remove the oil pan drain plug and allow the oil to drain completely.
Q: How do you install the oil filter adapter?
A:
You can install the following: the Oil Filter Adapter, the A/C compressor, the A/C compressor, and power steering drive belt, and the oil filter.
Q: What is the removal procedure for the heated oxygen sensor (Bank 1 Sensor 1)?
A:
The procedure is to turn the ignition OFF, disconnect the heated Oxygen Sensor (HO2S) electrical connector, remove the HO2S electrical connector, raise the vehicle and remove the HO2S from the catalytic converter.