< Back ×
My Vehicle Change Vehicle
2004 Cadillac SRX
< Back to View All
Power & Heated Seat
- Department
- Prices
OEM (Genuine) 2004 Cadillac SRX Adjust Switch
PartNumber: 10315826
Product Specifications- Notes: Driver Seat, Black; Passenger Seat, Black
- Other Names: Adjust Switch, Lumbar Switch, Switch
- Item Dimensions: 2.8 x 1.9 x 1.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25928038
- Part Description: 2004 Cadillac SRX Adjust Switch
Vehicle Fitment- 2004 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
$29.17 MSRP:$44.01You Save: $14.84 (34%)
OEM (Genuine) 2004 Cadillac SRX Seat Switch
PartNumber: 12450263
Product Specifications- Notes: Driver Seat; SRX; Left
- Other Names: Seat Switch, Switch
- Item Dimensions: 5.9 x 3.4 x 2.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac SRX Seat Switch
Vehicle Fitment- 2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2004 Cadillac SRX Switch, Driver Seat Adjuster Memory
PartNumber: 25749090
Product Specifications- Notes: 2004-06, Seat Memory; Srx
- Other Names: Memory Switch, Switch
- Item Dimensions: 5.5 x 2.4 x 1.7 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac SRX Switch, Driver Seat Adjuster Memory
Vehicle Fitment- 2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2004 Cadillac SRX Switch, Passenger Seat Reclining
PartNumber: 12450264
Product Specifications- Notes: Passenger Seat; SRX; Right
- Other Names: Adjuster Switch, Seat Switch, Switch
- Item Dimensions: 6.2 x 3.3 x 3.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac SRX Switch, Passenger Seat Reclining
Vehicle Fitment- 2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2004 Cadillac SRX Switch Asm-Driver Seat & Passenger Seat Lumbar Conical*Gray L
PartNumber: 25772913
Product Specifications- Notes: Driver Seat, Gray; Passenger Seat, Gray
- Other Names: Lumbar Switch
- Item Dimensions: 2.7 x 1.9 x 1.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac SRX Switch Asm-Driver Seat & Passenger Seat Lumbar Conical*Gray L
Vehicle Fitment- 2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2004 Cadillac SRX Switch Asm-Driver Seat & Passenger Seat Lumbar Conical*Neutral
PartNumber: 25772912Product Specifications- Notes: Driver Seat, Neutral; Passenger Seat, Neutral
- Other Names: Lumbar Switch
- Item Dimensions: 2.7 x 1.9 x 1.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac SRX Switch Asm-Driver Seat & Passenger Seat Lumbar Conical*Neutral
Vehicle Fitment- 2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
FAQ for Power Seat Switch Repair
Q: What may be necessary after replacing a memory seat module or adjuster components?
A:
It may be necessary to reset the adjuster motor soft stop locations.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the rear No.2 seat control module?
A:
The procedure is to remove: the seat cushion frame, the nuts from the control module, and the module.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque when installing the seat control module nuts?
A:
You can tighten the nuts to 9 Nm (80 lb in).
By Bob
GM Specialist
02/11/2022Q: What tool can you use to position the third-row power seat halfway up through the seating cycle?
A:
You can use the power seat button.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the power seat switch?
A:
The procedure is to disable the SIR system, remove the seat cushion, remove the knobs, locate and squeeze the retainers, remove the power seat switch bezel, release the J channel retainers, remove the push-in fastener and disconnect the electrical connector.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the memory seat switch?
A:
The procedure is to snap the door lock switch into the door switch bezel, connect the electrical connector, insert the rear of the door lock switch into the door trim panel and press down on the front of the door lock switch to engage the switch to the door trim panel.
By Bob
GM Specialist
01/11/2022Q: How do you install the lumbar switch?
A:
You can install the lumbar switch into the seat track trim cover, connect the electrical connector and install the seat track trim cover to the seat.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the rear quarter trim rear seat No.2 folding seat switch?
A:
The procedure is to remove the body side rear trim panel and remove the folding seat switch from the trim panel.
By Bob
GM Specialist
01/11/2022Q: How do you replace the memory seat switch?
A:
You can insert a flat-bladed tool under the front edge of the switch, disconnect the electrical connector, disengage the locking tabs from both sides of the switch and remove the lock switch.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the lumbar switch?
A:
The procedure is to remove the seat track trim cover from the seat, disconnect the lumbar switch electrical connector and remove the lumbar switch.
By Bob
GM Specialist
01/11/2022See more FAQs (7)