Part Description: 2004 Cadillac SRX Air Mass Meter
More Info
Vehicle Fitment
2004 Cadillac SRX | Base | 6 Cyl 3.6L
2004 Cadillac SRX | Confort | 6 Cyl 3.6L
2004 Cadillac SRX | Elegance | 6 Cyl 3.6L
2004 Cadillac SRX | Base | 8 Cyl 4.6L
2004 Cadillac SRX | Lujo | 8 Cyl 4.6L
Show More
FAQ for Mass Air Flow Sensor Repair
Q: What is the removal procedure for the mass air flow (MAF)/intake air temperature (IAT) sensor?
A:
The procedure is to turn the ignition OFF and remove the following: the mass air flow (MAF) electrical connector, the air cleaner intake duct, the MAF sensor fasteners, the MAF sensor, and the MAF sensor seal.
By Bob
GM Specialist
01/11/2022
Q: How do you install the mass air flow (MAF)/intake air temperature (IAT) sensor?
A:
You can install the following: the new MAF sensor seal and the MAF sensor, the MAF sensor screws, the air cleaner intake duct, and the MAF electrical connector.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How do you replace the throttle body assembly?
A:
You can turn the ignition OFF, remove the air cleaner intake duct, remove the Throttle Body electrical connector, unlock and reposition the wiring harness conduit, remove the throttle body bolts and remove the throttle body and gasket.
Q: What is the next step after assembling the intake manifold as necessary?
A:
The next step is to install the lower Intake Manifold gasket.
Q: What is the recommended torque when installing the air cleaner cover screws?
A:
You can tighten the air cleaner cover screws to 8 N.m (71 lb in).