< Back ×
My Vehicle Change Vehicle
2004 Cadillac SRX
< Back to View All
Lift Supports
- Department
- Brands
- Prices
OEM (Genuine) 2004 Cadillac SRX Assist Rod
PartNumber: 15211910
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Assist Rod, Lift Cylinder
- Item Dimensions: 28.6 x 2.1 x 1.1 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2004 Cadillac SRX Assist Rod
Vehicle Fitment- 2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
$62.47 MSRP:$94.25You Save: $31.78 (34%)
StrongArm® Hood Lift Support for 2004 Cadillac SRX
PartNumber: 4398Product Specifications- Body: 19.00
- BODY CONNECTION: ball socket (nylon) 10mm
- Brackets: No
- Compressed Length: 15.03
- Extended Length: 25.03
- Force: 30.00
- Hardware Kit: No
- High Performance Item: N
- Internal Springs: No
- Is Application Specific: Y
- Material: Heavy gauge steel pressure tube provides long life; Rubber o-ring piston seal for controlled lift; Teflon backup ring gives enhanced performance
- Shaft: 8.00
- SHAFT CONNECTION: ball socket (nylon) 16 degree
- Stroke: 10.00
- UPC: 845998003394
- Part Description: 2004 Cadillac SRX Hood Lift Support
Vehicle Fitment- 2004 Cadillac SRX | All Trims | All Engines
$18.00
FAQ for Hood Lift Support Repair
Q: What is the removal procedure for the hood assist rod ball stud?
A:
The procedure is to open the hood and remove the following: the assist rod, the lower hood assist rod ball stud and the upper hood assist rod ball stud.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when installing the upper assist rod ball stud to the hood?
A:
You can tighten the upper hood assist rod ball stud to 9 N.m (80 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the hood assist rod?
A:
The procedure is to open the hood, release the clip retaining the hood assist rod to the lower assist rod ball stud, release the clip retaining the hood assist rod to the upper assist rod ball stud and remove the hood assist rod from the vehicle.
By Bob
GM Specialist
01/11/2022Q: How do you install the hood assist rod?
A:
You can press the hood assist rod onto the upper hood assist rod ball stud, press the hood assist rod onto the lower hood assist rod ball stud, ensure that both clips are fully seated on the hood assist rod and close the hood.
By Bob
GM Specialist
01/11/2022