Notes: 2004-06, W/O Entertainment System; 2004-06, W/Entertainment System
Other Names: Cup Holder
Item Dimensions: 9.9 x 8.3 x 6.6 inches
Item Weight: 1.40 Pounds
Fitment Type: Direct Replacement
Replaces: 89039926
Part Description: 2004 Cadillac SRX Holder Asm-Front Floor Console Cup *Ebony
More Info
Vehicle Fitment
2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
FAQ for Cup Holder Repair
Q: What is the removal procedure for the front floor console cupholder?
A:
The procedure is to remove the following: the center console, the top trim, the 6 retaining screws on the cup holder, and the cup holder from the console.
By Bob
GM Specialist
01/11/2022
Q: How do you replace the front floor console cupholder?
A:
You can remove the following: the center console, the top trim, the 6 retaining screws on the cup holder, and the cup holder from the console.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque when installing the 6 retaining screws to the cup holder securing it to the console?
A:
You can tighten the screws to 2 N.m (9 lb in).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How do you replace the front seat cushion cover and pad?
A:
You can disable the SIR System, remove the seat cushion, turn the seat cushion upside down on a clean protected surface, release the seat cushion cover J channels, remove the seat cushion cover and remove the Seat Cushion Pad.
Q: How do you install the windshield pillar garnish molding?
A:
You can install the speaker, position the base of the garnish molding to the outside of the instrument panel pad, position the molding to the windshield pillar, push inward on the garnish molding, install the fastener and install the screw cover.
Q: What is the next step after installing the lock cylinder?
A:
The next step is to install the upper and lower trim covers.