< Back ×
My Vehicle Change Vehicle
2004 Cadillac SRX
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
Centric® Premium Brake Master Cylinder for 2004 Cadillac SRX
PartNumber: 130.62127Product Specifications- UPC: 805890194507
- Part Description: 2004 Cadillac SRX Premium Brake Master Cylinder
Vehicle Fitment- 2004 Cadillac SRX | All Trims | All Engines
$95.30
OEM (Genuine) 2004 Cadillac SRX Cylinder Asm, Brake Master
PartNumber: 19209229
Product Specifications- Other Names: Master Cylinder
- Item Dimensions: 9.5 x 7.3 x 9.5 inches
- Item Weight: 3.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 18046412
- Part Description: 2004 Cadillac SRX Cylinder Asm, Brake Master
Vehicle Fitment- 2004 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
Cardone Reman® Remanufactured Master Cylinder for 2004 Cadillac SRX
PartNumber: 10-3148Product Specifications- Notes: Supplied w/o Reservoir
- Bore Diameter (N): 1.00"
- E-Waste: No
- Installation Hardware Included: No
- Master Cylinder Color/Finish: Gray
- Master Cylinder Material: Aluminum
- Mounting Hole Quantity: 2
- Package Contents: Master Cylinder, Reservoir Pin Kit
- Port Quantity: 2
- Primary Port Size: 9/16 x 18
- Product Condition: Remanufactured
- Reservoir Included: No
- Secondary Port Size: 1/2 x 20
- UPC: 082617692519
- Part Description: 2004 Cadillac SRX Remanufactured Master Cylinder
Vehicle Fitment- 2004 Cadillac SRX | All Trims | All Engines
FAQ for Brake Master Cylinder Repair
Q: What is the recommended torque when you install the 2 brake master cylinder mounting nuts?
A:
You can tighten the 2 brake master cylinder mounting nuts to 25 Nm (18 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the master cylinder fluid level sensor?
A:
The procedure is to disconnect the electrical connector from the brake fluid level sensor and depress the retaining tabs on the end of the brake fluid level sensor and press the sensor through the reservoir to remove it.
By Bob
GM Specialist
01/11/2022Q: What is the first step for replacing the master cylinder?
A:
The first step is to remove the brake master cylinder from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended type of brake fluid when adding fluid to the brake master cylinder reservoir?
A:
You can use only Delco Supreme II, GM P/N 12377967 (Canadian P/N 992667), or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container.
By Bob
GM Specialist
01/11/2022Q: What should you clean before removing the cap and diaphragm?
A:
You should clean the outside of the master cylinder reservoir on and around the reservoir cap.
By Bob
GM Specialist
01/11/2022Q: How do you install the master cylinder fluid level sensor?
A:
You can align the brake fluid level sensor to the master cylinder reservoir, press the brake fluid level sensor into the master cylinder reservoir and connect the electrical connector to the brake fluid level sensor.
By Bob
GM Specialist
01/11/2022Q: What is the first step for filling the master cylinder reservoir?
A:
The first step is to visually inspect the brake fluid level through the brake master cylinder reservoir.
By Bob
GM Specialist
01/11/2022Q: What is the first step for replacing the master cylinder reservoir?
A:
The first step is to remove the fluid level sensor.
By Bob
GM Specialist
01/11/2022Q: What can you use to clean the reservoir?
A:
You can use clean denatured alcohol or equivalent.
By Bob
GM Specialist
01/11/2022See more FAQs (4)