Part Description: 2004 Cadillac SRX Tensioner, Timing Chain
More Info
Vehicle Fitment
2004 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS
FAQ for Belt Tensioner Repair
Q: What should you ensure after positioning the drive belt tensioner and bolt to the engine as an assembly?
A:
You should ensure that the alignment pin on the rear of the tensioner assembly is aligned with the locating hole on the engine.
By Bob
GM Specialist
29/10/2022
Q: How do you replace the generator and water pump drive belt tensioner?
A:
You can remove the generator and water pump drive belt, loosen the drive belt tensioner bolt and remove the drive belt tensioner and bolt from the engine.
By Bob
GM Specialist
29/10/2022
Q: How do you replace the power steering and air conditioning drive belt tensioner?
A:
You can remove the following: the generator and water pump drive belt, the power steering and air conditioning drive belt, and the drive belt tensioner and bolt from the engine.
By Bob
GM Specialist
29/10/2022
Q: What is the recommended torque when installing the drive belt tensioner bolt?
A:
You can tighten the drive belt tensioner bolt to 50 Nm (37 ft. lbs.).
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: What is the first step for installing the primary camshaft drive chain and sprockets?
A:
The first step is to install the primary camshaft Timing Chain.
Q: What should you ensure before installing the right camshaft?
A:
You should ensure that the marks on the Camshaft position actuators and the timing chain are aligned.
Q: What is the proper way to install the generator and water pump drive belt?
A:
You can install the Drive Belt to the crankshaft pulley, the tensioner, and the generator, rotate the drive belt tensioner clockwise, install the drive belt to the water pump and release the drive belt tensioner.